Well i have a late model 2000, black chevy impala to do tommorow. The car is black and the swirl marks are pretty bad on the paint. I dont have a picture,but you guys have any suggestions on what products work the best for this color/swirl removal. I have basically every meguairs pro line, klasse, poorboys,clearkote.. I have a rotarty and a pc, but im still scared of the rotary for continous use with the american cars have thin mils of paint. I was thinking just using the rotary with the red pad, then follow with the pc for polishing.
pretty bad swirls on black newer chevy car. help!!
- Thread starter quamen
- Start date
Deanski
STUTTGART'S FINEST
Rotary, use Megs SFP and POLISH pad. If this does not get out the swirls, switch to DACP and fresh polish pad.
Do NOT use a cutting pad with a rotary unless you have good experience with a rotary, and you are familure with the product line, the pads and the rotary speeds. A cutting pad is used for serious defects.
Always go with a lower combo first.
I've done rotary & SFP, then switch to PC and polish pad with DACP to remove any leftover issues and polish it up a bit more.
Then, I switch to a finer polish, say like Menzerna FP or Megs hand polish and finish with that.
Regards,
Deanski
Do NOT use a cutting pad with a rotary unless you have good experience with a rotary, and you are familure with the product line, the pads and the rotary speeds. A cutting pad is used for serious defects.
Always go with a lower combo first.
I've done rotary & SFP, then switch to PC and polish pad with DACP to remove any leftover issues and polish it up a bit more.
Then, I switch to a finer polish, say like Menzerna FP or Megs hand polish and finish with that.
Regards,
Deanski