pressure washer on the blink

[clean4u]

Got a problem here with the old pressure washer. This is whats going on dont have any pressure at all.I check to make sure i dont have any cloged lines and eveything everything seems to be ok. Just dont know what could be the problem? Any one here knows anything about pressure washes that could help me out?:dunno

 

[Alex]

Is the pressure washer connected to a pump that is pulling water from a tank?
\

 

[clean4u]

connected to water hose

 

[70ssLS6]

If your pump sounds normal, then I would suggest checking the unloader valve assembly by unscrewing the pressure regulator and inspecting spring movement.
If you have a solution hose going to the pump make sure it doesn't have a pinhole in it somewhere. even the smallest hole will make the pump suck air and cause a "no-pressure" problem.
Good luck

 

[kimwallace]

yeah:
Get out the instruction manual.
Sometimes the valves get stuck from minerals in the water.
It should have a break down and tell you how to free them up.
I haven't used it, but there are chemicals you can run through your pump to keep this from happening.
Check at Lowes, Sears or Home Depot.

 

[clean4u]

thanks alot ill try that