Poorboys on white Durango**PICS**

crazy roscoe

crazy roscoe

New member
Helped a friend detail his white Durango yesterday using Poorboy products.
This is what we used,

On body,
Washed : Super Slick & Suds
Clayed: Super Slick & Suds as lube
PP: applied with PC & white polishing pad
SSR1: applied with PC & white polishing pad
EX-P: applied with Poorboys PVA sponge
Nattys Wax: applied with Poorboys PVA sponge

Wheels,
Spray & Rinse Wheel Cleaner
PP & EX-P on rims
B & B on tires
 
no actually its a Dodge .....kiddin'.
nice shot of the wheel well, its nice and black and the flash of the camera shows it off.

but... you see the outer edge of that tire, where there is deep grooves, my meg's endurance (which is a thick gel) wont spread in those grooves too well. and thats why i like the aeorosols. but....any of you guys try to thin out the ENDURANCE so it will fall in all those grooves and crevices all tires have???
 
Sweet! Nice job. How long did it take you? The more I use the PB line of products the more I like them.
 
Just passed the Dodge Ram Sport on the way back from dropping the kids off at school and I should have taken the pics today, when the sun hit it the reflections were awesom. Will try and get some pics.
Andrew: I used NO Touch WET N' PROTECT on the wheel wells.

mgm 2003: it took us about 4 hours

Next job is his wife's Red Avalanche and I doubled checked the name this time and it is an Avalanche.
 
Looks great :bigups I was wondering why used PP followed by SSR 1 ? and not the other way around. I've used SSR1 before but not PP .
 
Look Great!

Poorboy's did a nice job (well... you did) on the Dakota!

Not to jump in on your post, but I did a Dakota today and used all Poorboy's as well! I LOVE the Poorboy's Line!

Wash
Clay
SSR2.5
SSR1.0
EX
Trim Restore

Sorry for the poor (no pun) picture quality! Batteries were low and I wanted to sanp of a pic quick before the camera died!

I really hope you don't mind I shared my Dakota with your Dakota! Sorry if you do!
 
Andrew: Never had a problem with it but I do a light coat and then if it needs it I give it another coat. The stuff works great and is real simple to use.
Rollman:Didn't plan on using SSR1 but we noticed some swirls and wanted to give it a try. Even though swirls are'nt that noticeable on white.& It did improve the shine
f1guy68: Not a problem
 
You must log in or register to reply here.
Back
Top