MENTALLY ILL
New member
Can I add multiple layer? is it worth it or just a waist of time and product?:nixweiss
Pinnacle Signature
- Thread starter MENTALLY ILL
- Start date
mtodde
Silver Car Fan
You can add a second layer of Signature however you should wait several days between layers...I waited a week. The main thing this will do is to help provide even coverage. I did notice some slight improvements in the clarity, wetness and depth.
togwt
The Old Grey Whistle Test
~One manâ€â„¢s opinion / observations~
Layering:
Solvents provide a lubricant and aid the adherence process by working their way into the microscopic gaps and valleys of the previous `layer' softening it, providing each subsequent applications carrying agent (solvent, oils silicones or emulsion) are not so concentrated that they degrade or remove (as in the case of a cleaner wax) what has been previously applied.
Both Pinnacle Souverän and Signature waxes are low-solvent ivory Carnauba wax (making it an ideal LSP) that contains natural oils that provide a deep gloss, and a â€Ëœwet-lookâ€â„¢ to the paint film surface
Also be aware that the both the product and the foam pad may be non-abrasive, but application pressure if not kept to an absolute minimum and using use a very light and even pressure, may re-introduce surface marring and/or removal of the previously applied product.
Sufficient time should be allowed between removing residue and increasing product density or adding any other products, Carnauba wax-2 to 12 hours, these times are a guide only as they will vary by formula, ambient air temperature and humidity
~Hope this helps~
Knowledge unshared is experience wasted [each one / teach one]
justadumbarchitect / so I question everything/ JonM
Layering:
Solvents provide a lubricant and aid the adherence process by working their way into the microscopic gaps and valleys of the previous `layer' softening it, providing each subsequent applications carrying agent (solvent, oils silicones or emulsion) are not so concentrated that they degrade or remove (as in the case of a cleaner wax) what has been previously applied.
Both Pinnacle Souverän and Signature waxes are low-solvent ivory Carnauba wax (making it an ideal LSP) that contains natural oils that provide a deep gloss, and a â€Ëœwet-lookâ€â„¢ to the paint film surface
Also be aware that the both the product and the foam pad may be non-abrasive, but application pressure if not kept to an absolute minimum and using use a very light and even pressure, may re-introduce surface marring and/or removal of the previously applied product.
Sufficient time should be allowed between removing residue and increasing product density or adding any other products, Carnauba wax-2 to 12 hours, these times are a guide only as they will vary by formula, ambient air temperature and humidity
~Hope this helps~
Knowledge unshared is experience wasted [each one / teach one]
justadumbarchitect / so I question everything/ JonM