OceanRagtop
New member
A friend's 1993 Mazda Miata's red paint has seen better days. It was glossy enough, but had far too many scratches, swirls, hazing and mild oxidation in places to really look good. Today, we gave it the full treatment.
Click here for pics.
Enjoy!
Steps performed: wash, clay bar, wash, Porter-Cable 7424 random orbital with 6in pads, deep polishing in spots with yellow pad and Meguiar's Medium Cut #1, white pad and Meguiar's #83/DACP, white pad with Meguiar's Fine Cut #2, black pad with Meguiar's #9 Swirl Remover 2.0, then two coats of Meguiar's #7 Show Car Glaze with black pad. Finished off with Pinnacle Crystal Mist quick detailer, two coats. No time left to put wax on, which will be done over the coming three days (one coat per day, left to cure).
Equipment: Microfiber cloths for all removal of drying chemicals; PC7424 with 6in counter balance; 6in velcro backing plate; 3 black pads (could have used 2 more); 4 white pads (could have used 2 more); 1 yellow pad, 1 orange pad, 1 lambswool pad, 2 MF bonnets.
Time to complete, with one person polishing and one following behind cleaning remains and keeping pads clean and washed: 4 hrs, 2 people, 4 glasses of iced tea, 1 halibut dinner with trimmings.
Oooof. Now, where's the masseuse ...
BTW, many thanks to the many knowledgeable folks on Autopia's forums for suggestions and techniques on using the PC polisher. The tips were very helpful.
Click here for pics.
Enjoy!
Steps performed: wash, clay bar, wash, Porter-Cable 7424 random orbital with 6in pads, deep polishing in spots with yellow pad and Meguiar's Medium Cut #1, white pad and Meguiar's #83/DACP, white pad with Meguiar's Fine Cut #2, black pad with Meguiar's #9 Swirl Remover 2.0, then two coats of Meguiar's #7 Show Car Glaze with black pad. Finished off with Pinnacle Crystal Mist quick detailer, two coats. No time left to put wax on, which will be done over the coming three days (one coat per day, left to cure).
Equipment: Microfiber cloths for all removal of drying chemicals; PC7424 with 6in counter balance; 6in velcro backing plate; 3 black pads (could have used 2 more); 4 white pads (could have used 2 more); 1 yellow pad, 1 orange pad, 1 lambswool pad, 2 MF bonnets.
Time to complete, with one person polishing and one following behind cleaning remains and keeping pads clean and washed: 4 hrs, 2 people, 4 glasses of iced tea, 1 halibut dinner with trimmings.
Oooof. Now, where's the masseuse ...
BTW, many thanks to the many knowledgeable folks on Autopia's forums for suggestions and techniques on using the PC polisher. The tips were very helpful.