PC Tehcnique

[ToddW]

So I can't watch the meguiars video because Real Media Player sucks... so what technique do you guys use w/your PC?



I`m looking for a video to show me if possible MOV or WMV .



-Todd

 

[imported_Burlyq]

http://www.3m.com/us/auto_marine_aero/aad/solutions/video/index.jhtml

try these if you want a vid.

 

[ToddW]

Thanks any idea which one the PC is in ?

 

[imported_Burlyq]

I haven't seen them except the dry sanding vid, but if they have it it would be under polishing probably.

 

[ToddW]

They use a buffer.

 

[imported_Burlyq]

PC's are simple, spray pad lightly with water and put about 1/4 oz polish, smush around the panel, start on 4 for one pass then bump it up to 6, with moderate pressure do a figure eight until the polish disappears or dusts out. After removing swirls repeat with finishing polish to set that mirror shine. I've used the PC a couple times and I can say don't worry about it they can't possibly hurt your car, I usually use rotary. The only issue I have with PC is sometimes having to go back over and over to remove the swirls if they are bad.

 

[imported_JoganJani]

It's explained nicely in the Autopia guide. Read through and you'll know exactly how it should be used, at what speed, with what pressure, how to clean pads etc. My PC is on its way and I just read through that section and found it very useful.

 

[ToddW]

It's explained nicely in the Autopia guide. Read through and you'll know exactly how it should be used, at what speed, with what pressure, how to clean pads etc. My PC is on its way and I just read through that section and found it very useful.

What's the URL to the guide?

 

[the other pc]

You can go to the button up at the top of the page the says learn!,



or just click here.





PC.