PC Speed Question

[gb387]

I am sure this has been asked before but what is a good speed to use when using your PC 7336



I use one speed, 4.5 for Cleaning/Polishing/Waxing, is that ok or should I be doing something else here is what I use:



1. Meguiars Deep Crystal Paint Cleaner

2. I am out of polish and will be changing to something in meguiars mirror glaze line

3. NXT Wax

 

[airjames]

Hey jb387,



I too have the 7336SP model. I usually go by the following



Cleaner Polisher/Medium cut polishes - speed 5 with polishing and or cutting pad



Light polishes or glazes - 4.5 - 5 with polishing or finishing pad



waxes or sealants - 4 - 4.5 with finishing pad





Hope this helps you out alittle,,,,91

 

[LouisanaJeeper]

I used NXT @ 3

Generally, Cutting Pad products- 5-6, Polishing pad products 4-5, Waxes 3

 

[ranch4x4]

I use 4.5- 5.0 for polishes.

 

[imported_rusty bumper]

I like to use 4 1/2 speed for applying Deep Crystal Paint Cleaner, then, after I spread it out, I kick it up to #5 setting and work the product in a good minute or two...I also use Meg's 6" red cutting pad with DCPC...This combo makes for a great shine.

 

[gb387]

Thanks for the help! I will adjust my speed next time