PC speed/pad on different products question

Webb

Webb

Member
for...

MPPC

Show Car Glaze

M-26 Yellow Wax

On my first time using MPPC I kept my PC on 3.5-4.0 was that a good speed for it ?

Show car glaze was applied by hand,but next time I want to try with a PC,which pad/speed would you guys recomend ?

M-26 or any kind of wax I prefer by hand.

Thanks
 
Show Car Glaze has no cleaning or abrasives so you can use the soft buff pad (one you would use to apply a wax or sealant)...
 
For any type of polishing where you are using some type of deminishing abrasive polish or paint cleaner, I would recommend either a cutting or polishing pad with a speed setting of 4.5-5. For glazes and waxes I would recommend using a finishing pad on a setting of 2.5-3.
 
I pretty much agree with overtheedge...................

For the MPPC, I would spread the product over the area you are working at a speed of 3 using a polishing pad, and then turn it up to 5 to work it, and then quickly remove the product with an MF.

For the #7, I would apply using a finishing pad at a speed of around 3.
 
You must log in or register to reply here.
Back
Top