PC Pad Maintenance

I

imported_Denzil

New member
I know there probably isn't a best way to clean your pads but I sure would like to hear how everyone else cleans theirs. I am getting ready to detail a very oxidized 1989 525i and I definitely need to find a way to clean these babies. Thanks for the help.



F.Y.I. I have...

- (1) Yellow Propel

- (1) Orange Propel

- (2) Green Propels

- (2) Blue Propels

- (1) Black Propel



:D
 
I cleaned very oxidized paint off of an old Accord earlier this week, and to clean the pads I just scrubbed them a bit, and let them soak in a bucket of warm-to-hot water with Dawn. I waited an hour or two, and then scrubbed them again. Then I rinsed them out. They come out pretty clean, but not like brand new anymore. :(



You can see the pics of the pads before washing at my thread in the Extreme Detail Contest forum.
 
Thanks for the advice Max.



I looked at your thread and wow, just wow. That Accord looked like it was primered a rusty brick color. I'm thinking the 525i is almost as bad. What I have to work with is the 4* car care trio from Excel Detail. I'm really not sure if the 4* SMR will do the job but I'll see what I can do.



Again, thanks for the PC pad cleaning tips. I have a feeling I'm going to be cleaning them after every panel or two. :rolleyes:
 
Oh during the detail I cleaned the pads after every panel. For the hood and roof, I cleaned the pads twice EACH! Those areas were absolutely horrible.

I have 2 green Propel pads and 2 yellow ones that I used, so I would let one of them soak in the Dawn and warm water while I used the other one. Then after that one got caked with oxidation, I scrubbed the soaking one off, and rinsed it under the faucet. After a couple rinses, I squeezed out most of the water, sandwiched it between a MF towel, and then spun it dry on the PC at speed 3.

Repeat after every panel.
 
Ok cool Max. Thanks for your input.



Does anyone else out there that would like to post their method of cleaning your PC pads? ... or does everyone clean theirs like Max??? :confused:



I remember reading in the e-book that the use of horse hair brushes was essential... :nixweiss
 
Foam Pad Care / Washing:

Clean foam pads soon after use, if left saturated for extended periods of time the foam will deteriorate; extend the useful life of the foam pads by periodic cleaning. Snappy Clean (properautocare.com) is a citrus pad cleaner in powder form; empty the contents of one packet into a 5-gallon bucket of water. As your foam and/or wool pads become caked with residues, just peel them off your polisher and place them into the bucket to soak. Put a clean pad on your polisher and continue polishing.



A word of caution when using foam pads, check the pad face for residue build-up, when loaded with dried product they have an abrasive action that could be detrimental to the paint finish. Clean residue from pads often with a soft horsehair or soft nylon brush as metal may damage the foam



If there is extensive oxidation I would heed White95Max's advice and wash them often

JonM
 
White95Max said:
....

so I would let one of them soak in the Dawn and warm water while I used the other one. Then after that one got caked with oxidation, I scrubbed the soaking one off, and rinsed it under the faucet. After a couple rinses, I squeezed out most of the water, sandwiched it between a MF towel, and then spun it dry on the PC at speed 3.

Repeat after every panel.
Click to expand...



White95Max,

What did you use to scrub the pad? I don't have a brush that I would trust to not tear the pad material up .... and I want these things to last a while.



Russ
 
TOGWT said:
Foam Pad Care / Washing:

Clean foam pads soon after use, if left saturated for extended periods of time the foam will deteriorate; extend the useful life of the foam pads by periodic cleaning. Snappy Clean (properautocare.com) is a citrus pad cleaner in powder form; empty the contents of one packet into a 5-gallon bucket of water. As your foam and/or wool pads become caked with residues, just peel them off your polisher and place them into the bucket to soak. Put a clean pad on your polisher and continue polishing.



A word of caution when using foam pads, check the pad face for residue build-up, when loaded with dried product they have an abrasive action that could be detrimental to the paint finish. Clean residue from pads often with a soft horsehair or soft nylon brush as metal may damage the foam



If there is extensive oxidation I would heed White95Max's advice and wash them often

JonM
Click to expand...



Would a toothbrush work and how soft a nylon brush are we talking horsehair soft or alittle more bite. Seems like the horsehair wouldn't do alot?



Good info
 
rayvenn said:
White95Max,

What did you use to scrub the pad? I don't have a brush that I would trust to not tear the pad material up .... and I want these things to last a while.



Russ
Click to expand...



To scrub the pads, I just used my fingers.
 
White95Max said:
To scrub the pads, I just used my fingers.
Click to expand...



har har. Well. I was making it more complex than necessary again, I see. Thanks for the reply ... and I guess that's easier to keep from tearing up the pads than using a brush.
 
I soak mine in Sonus der Wonder wash. It works really good. I let them soak over night and it seems the Sonus extracts all the polish. I then rinse them in cold water and let them dry before use or storage.
 
Intercooled said:
I soak mine in Sonus der Wonder wash. It works really good. I let them soak over night and it seems the Sonus extracts all the polish. I then rinse them in cold water and let them dry before use or storage.
Click to expand...

Is Sonus much more better than Dawn. I only wax my car and some other and I do it by hand (for now), should I simply use Dawn until my pad is done (pad arent so expensive)
 
For hand pads, microfiber or terry applicators I would just throw them in the wash. ( regular laundry detergent always worked for me.) Dawn would be fine as well, just rinse them real good when they're clean.
 
Hmm.. the Snappy Clean Pro Cleaning Powder seems to be the most costly method. I am interested in trying the Sonus Der Wunder Wasche since it does clean MF's, WW's, and PC pads. Of course there is always the cheapest alternative, Dawn. :nixweiss
 
Hiya folks....



I was gonna post how do u clean your pads then found this he he



But just a quick question how long do your pads work with these cleaning techniques?
 
Intercooled said:
I soak mine in Sonus der Wonder wash. It works really good. I let them soak over night and it seems the Sonus extracts all the polish. I then rinse them in cold water and let them dry before use or storage.
Click to expand...



Same here. I still have last years Sonus pads that I used the heck out of.
 
I am still using my original pads for the PC that I bought last fall. I had one show problems, but that issue was quickly resolved.



My hand applicators last me at least a year. If they get really dirty or torn up, I get new ones.
 
Hey Max, have you ever tried the Sonus Der Wunder Wasche? I'm thinking of buying it along with Dawn to test and compare the results of these two products myself.
 
You must log in or register to reply here.
Back
Top