PC Help for Ford Paint

[justdrew424]

Hey,



I have an 06 Black Ford Explorer. Living in the desert it gets covered daily with a layer of dust. I use PB S&W almost daily, at least every other day. I hit it with Z-6 a few times a week. With the dust and the regular wipings I know I can't avoid the marring that I am getting. Washing every other day is just not an option. Well someone was nice enough to get me the PC7424 kit with pads from Autogeek. This is a Zaino maintained vehicle. It is 6 months old and has gotten a new layer of Z about once a month. The swirls are not out of control, but I can notice some marring in the sun. Now my question is, which polishing/swirl remover products should I be leaning towards so I can easily go back to Zaino. I am leaning towards the SSR line or the Optimum line. It appears these have no glazes or oils and would be Zaino friendly. Any other suggestions or recommendations?



Thanks

Drew

 

[Super]

Hmmmm? After applying what ever on your car try this wipe down your car with a MF real good and after that get an anti-static rag and wipe down. Or hose it down and wipe off, that will take off any residue and or static from your car. Use a car soap w/o conditioners such as Meguiar's hyper wash. It’s the residue and or the static on your car that is attracting the dust.

On a polish I would get one without leaving a polymer behind. Menzerna polish is a good one. I would remove the Z by polishing don’t forget to clay and start over again with the Z about 4 layers of it and apply a plan Carnauba Wax without any other added ingredients to the Carnauba. Souverän Paste Wax is a good choice. Carnauba gets real hard after 24 hrs.