Ordered some Natty's Red yesterday

mcate

New member
Looking forward to trying it out. I usually use Blue on my 2 red & black Mustangs, & white on my wife's white Expedition. I've noticed how people on here use a couple of coats of Blue, then top off with Red. I'm wondering whether to try that, or just go with Red by itself? I have a feeling the answer will be to try different combinations & see what I like best. Right?
 
Looking forward to trying it out. I usually use Blue on my 2 red & black Mustangs, & white on my wife's white Expedition. I've noticed how people on here use a couple of coats of Blue, then top off with Red. I'm wondering whether to try that, or just go with Red by itself? I have a feeling the answer will be to try different combinations & see what I like best. Right?

YEP !!!!

But on the other hand I love 2 blue then start hittin the red. :bigups

Remember you have 3 different colors so the combinations are endless. :yay

One thing for sure, is you'll love it. WET and SLICK !!!
 
I did the same thing myself (red over blue) but i loved the results when i used the red. Then i couldnt stop applying coats of red, and that how i became a official waxwaster. I think Steve had a combo he liked the best. I cant remember what it was. You going to post some pics when u r done?
 
I did two coats of red and then one coat of blue last weekend. I can be a tad trendy :crazy2:

Start adding more and you can become a wax waster.......

IMG_5163.jpg



CIMG0080.jpg
 
You going to post some pics when u r done?

Definitely! Might not be until spring, however. My toys are pretty much put away for the season. I might go ahead & do the torch red Mach when the Red comes in. When I detailed it last spring I used SSR1, Black Hole (for the 1st time ever), EX, & Natty's Blue. I'll do the same things this time, only top off w/a few coats of Red. I think that should solidify my status as a wax waster!
 
Definitely! Might not be until spring, however. My toys are pretty much put away for the season. I might go ahead & do the torch red Mach when the Red comes in. When I detailed it last spring I used SSR1, Black Hole (for the 1st time ever), EX, & Natty's Blue. I'll do the same things this time, only top off w/a few coats of Red. I think that should solidify my status as a wax waster!

Ask Shawn how many coats of wax he has on his truck right now. :inspector:


1243535555.jpg


1242324248.jpg


quagmire_giggity_giggity_goo.jpg
 
Im ready do redo my truck for the winter, im going with Steves combo this time. Yes i have put about 3 coats of blue and 5 coats of red at this point. But some time has passed now so its time to do it again and im sooooo excited. That red mustang im sure looks hot when its freshly waxed.
 
Definitely! Might not be until spring, however. My toys are pretty much put away for the season. I might go ahead & do the torch red Mach when the Red comes in. When I detailed it last spring I used SSR1, Black Hole (for the 1st time ever), EX, & Natty's Blue. I'll do the same things this time, only top off w/a few coats of Red. I think that should solidify my status as a wax waster!

Well did you do the Mustang?

Post up some pics!! :inspector:
 
Taste is even better....don't ask:D

:redcard:Poorboy's world does not recommend or condon this type of behavior and is not liable for Dave's actions :redcard: lmao :rofl

What is the difference with blue and red?

The Red is our wettest slickest deepest wax makes metallic pop as well...One problem is the red will actually magnify your finish so if the paints got a couple of cobwebs on there or swirls it will make them just show more because it enhances the finish so much!..the blue ranks up there but will not magnify the finish is for darker colors and not good for metallic but to each his own i tried BH on a silver car with metallic and LOVED the way it looked lol :hmmm:
 
Ronhk will chime in on this one but no it will not.... thats why ron layers he likes the look of both.
 
Back
Top