Opti-seal
- Thread starter oN3fastSS
- Start date
a.k.a. Patrick
New member
Ya may want to add the Nattys on the a** end though......
namegoeshere
New member
:werd:
Klasse AIO, Opti-Seal, and then top with Natty's Red
If you do Natty's before Opti, Natty's will probably prevent Opti from bonding with paint.
Then again Opti looks so good on its own, you really don't need to top it with anything.
Klasse AIO, Opti-Seal, and then top with Natty's Red
If you do Natty's before Opti, Natty's will probably prevent Opti from bonding with paint.
Then again Opti looks so good on its own, you really don't need to top it with anything.
a.k.a. Patrick
New member
I'd recommend a good 24 hr wait before topping Optiseal.....Lower humidity will decrease that wait time.
a.k.a. Patrick
New member
BigHonu said:
:spot :drool:
steelwind101
New member
NIEN!
AS i have said a MILLION TIMES OPTI SEAL IS FINE OVER NUBA.
YES APPLY OPTI SEAL OVER NATTYS RED, it will seal in the Nattys look for about 10-12 weeks no problems. It wont change the looks hardly at all.
No need to mess about with less looks in the winter, use PS, use what ever you want and top with OPTI SEAL!
I should a do a sticky on Opti Seal!
As far as waiting goes, i have not tried it with Nattys Red but with PS you want to wait about 30 mins or so to make sure it has time to "air" my choice of words. LOL. But just a period for it cool off so there nothing to be expelled from the nuba before you seal it in.
Geoff
AS i have said a MILLION TIMES OPTI SEAL IS FINE OVER NUBA.
YES APPLY OPTI SEAL OVER NATTYS RED, it will seal in the Nattys look for about 10-12 weeks no problems. It wont change the looks hardly at all.
No need to mess about with less looks in the winter, use PS, use what ever you want and top with OPTI SEAL!
I should a do a sticky on Opti Seal!
As far as waiting goes, i have not tried it with Nattys Red but with PS you want to wait about 30 mins or so to make sure it has time to "air" my choice of words. LOL. But just a period for it cool off so there nothing to be expelled from the nuba before you seal it in.
Geoff
Chris@Optimum
Optimum Product Support
Dr G at OPT told me that OS will make its way to the paint suface, no need to wait or apply in a certain order. Also, the curing process is only necessary before you can lay down another layer of OS, not another LSP