Opti Seal on Bare Aluminum?

MarkD

MarkD

New member
Hello Folks,
Have any tried such on bare aluminum? I have this product and was thinking of trying this on both highly polished aluminum on custom made audio equipment parts, as well as using it on some more beaten, oxidized sheeting that sits outside 24/7.

Can I expect mucho black coming off the aluminum? I would suspect it on the oxidized sheeting, and it probably should be pre-cleaned beforehand.

Any simple products that could/should be used on the aluminum prior to application?

I would assume any pre-polishing on high quality parts should then be final wiped with something like Alcohol for better bonding?

Here's an example of what parts I'm thinking of coating with such a product.
The Arm Base, and Platter Clamp are custom machined Alu Parts.
Thanks all, MarkDSCF0441.JPG
 
MarkD said:
Hello Folks,
Have any tried such on bare aluminum? I have this product and was thinking of trying this on both highly polished aluminum on custom made audio equipment parts, as well as using it on some more beaten, oxidized sheeting that sits outside 24/7.

Can I expect mucho black coming off the aluminum? I would suspect it on the oxidized sheeting, and it probably should be pre-cleaned beforehand.

Any simple products that could/should be used on the aluminum prior to application?

I would assume any pre-polishing on high quality parts should then be final wiped with something like Alcohol for better bonding?

Here's an example of what parts I'm thinking of coating with such a product.
The Arm Base, and Platter Clamp are custom machined Alu Parts.
Thanks all, MarkView attachment 12788
Click to expand...

I'm not 100% sure how it will work on uncoated aluminum, but it is worth a shot. Yes you would want to remove any oxidation with a polish then wipe the surface with alcohol several times.
 
Well Gents, I figure I'm going to go for broke on this one, and give it a try.

Not so much on pristine aluminum that resides in the house, but on beat to hell aluminum that sits outside 365 days a year.

I predict mucho black on the applicator, and I recently ran into a garbage bag full of sponge applicators, so no loss there.

My take, before I even lay Opti Seal to metal? It's gotta be much better than nothing! LOL

I'll keep you fine folks updated, as I'm going to try this goony application tomorrow. Mark
 
I've used Ultima Paint Guard (similar product) on bare aluminum. It helps protect it from the environment but there won't be any black. It's not a polish but just a sealant.

For it to turn black there would have to some sort of abrasive or cleaner in it to remove oxidation from the metal.
 
DO NOT USE SIMPLE GREEN TO CLEAN IT

for some reason simple green can pit/mark aliminum......

imho use something like pb pro polish, then seal
 
You must log in or register to reply here.
Back
Top