Opti Poli-seal base with FK1000 topper .. will this work?

D

DM101

New member
Poli-seal base with FK1000 topper .. will this work? I am not real familar with

FK1000's cleaning abilities. Will the 1000 take the slick finish of the Poli-seal off??? Just got some Poli-seal and did a test spot over FK1000 and it left a area slick as I have seen. But I like the 1000P for it's nuba likeness finish.
 
I applied UPGP and let it cure for about an hour and then applied FK1000p a few days later I noticed there was no protection on the car at all. I think I should have let the UPGP cure overnight.





Not sure how Poli-seal will play with the FK but I think the trick would be to let it cure. I have had no problems with Opti-seal and any other LSP. I have applied Fuzion and Natty blue on top of OS with no problems. In fact I just applied some OS over two month old Fuzion with no problems and it came out great!
 
Yes I agree with you in that you should have let the UPGP cure overnight.



Derek173 said:
I applied UPGP and let it cure for about an hour and then applied FK1000p a few days later I noticed there was no protection on the car at all. I think I should have let the UPGP cure overnight.





Not sure how Poli-seal will play with the FK but I think the trick would be to let it cure. I have had no problems with Opti-seal and any other LSP. I have applied Fuzion and Natty blue on top of OS with no problems. In fact I just applied some OS over two month old Fuzion with no problems and it came out great!
Click to expand...
 
I'm sorry for digging this thread but I am curious about the result in case the thread starter proceeded with it. MDRX8, what was the result? Anyone tried it?
 
Poli-Seal contains carnauba, so it won't be the best base for a good synthetic bonding. But the carnauba percentage is low, so it is worth to experiment a bit. OOS/1000P sounds better to me.
 
Bence said:
Poli-Seal contains carnauba, so it won't be the best base for a good synthetic bonding. But the carnauba percentage is low, so it is worth to experiment a bit. OOS/1000P sounds better to me.
Click to expand...



Thanks sir. I picked up OPS as my abrasive AIO, and I planned to top it with 1000P. I go ahead with the experiment.

Have you tried OOS/100P? What should go first? I am tempted to buy OS for its ease of use, and for being bang for a buck. If if works well with FK1000P, I will probably offend my pockets sooner.
 
Bence said:
It works well with synthetics. You won't regret it.
Click to expand...



Thanks. I feel more validated in choosing FK1000P. I tested it on a paint and I love how easy it is to spread and remove. The succeeding layers glide smoothly. What should go first, FK1000P or the other synthetic LSP? TIA.
 
OS is a great base for anything but as good as it looks on its own, I normally just use it. However, if you want to use a beauty wax and make sure there is still protection underneath once the wax is gone, OS is a terrific choice.
 
You must log in or register to reply here.
Back
Top