Only thing going to get this haze off is a PC huh? Pics

B

BradUF

New member
Car3.jpg




Car1.jpg
 
It is kind of hard to tell what it is from the distance of the shot. Have you tried using an AIO cleaner wax? Or better yet what have you tried to do to it to come to the conclusion of possibly needing a PC.



It can be as simple as a haze from a wax to as complicated as (I hate to say) clear coat issues (if in fact it is a clear).
 
looks more like oxidation instead of haze. you can try DG 105 or 501. it will yake some off. and use a clay bar before the DG
 
are you talking about that splotchy looking spot just to the right of the passenger headlight...about 8-12 inches up the hood?



i don't think duragloss (or much any sealant...) will help with oxidation unless is it very, very minor oxidation. you really need to use a PC or other buffer to get the dead paint off there.
 
Thats a red car I bet he's talking about the oxidation.



By hand you can try Meguiars Color X or paint Cleaner. But yes a PC will save your elbows.
 
How can any of you guys honestly give advice without seeing a better picture?? Cripe, that could just be a huge loogey some kid hocked on the hood from that picture.
 
Well if it does in fact have haze all over, you're gonna need something pretty abrasive for that hard clear coat (coming from an LS1 owner myself). I'd start with an orange pad and something like Menzerna intensive polish, followed up with a final polish then sealant for the upcoming winter months.
 
I have huge problems with haze, swirls and spots only on the hood and top of the car. Only place where it shows up bad. I order the UDM, I have all the pads and I have Poorboys 2.5 and 1... Think I am ready to go but lol I just waxed the car. Just wash it with dawn right, then polish it right?
 
Wash with dawn, might try a clay bar to see if that helps remove anything if it's just some surface oxidation/hazing. Then, get to polishing.
 
lol I have had pads for 6 months and now it is going to happen. I am going to get my car right...



100_0127-1.jpg




Let me make my check list...



Sonus Clay Bar, check

UDM, check

Pads, check

PoorBoys SSR 2.5 and 1, check

Klasse All in One, check

P21s, check



Am I ready to go guys?
 
Hey guys, do you think I need a glaze on top of the Klasse all in one? then a wax? I know KIO is suppose to be a sealant but does it add any depth?
 
Oh I want to be ready to go when my UDM gets here. So orange pad with SSR 2.5 then light cutting with SSR 1 and finishing pad with KIO correct?
 
Light cutting pad with SSR2.5, polishing pad with SSR1, finishing pad with KAIO, wax by hand. A glaze isn't needed and really KAIO isn't needed either, but thats personal preferance.
 
budman3 said:
Light cutting pad with SSR2.5, polishing pad with SSR1, finishing pad with KAIO, wax by hand. A glaze isn't needed and really KAIO isn't needed either, but thats personal preferance.
Click to expand...



2X

also think of AIO as a great chemical cleaner

and a good base for your lsp not much in the way of a sealant
 
You must log in or register to reply here.
Back
Top