~One man’s opinion / observations ~
Microfiber Towel Care:
If the towel becomes too dirty, it will begin to “streak�, it is then time to wash the towel. Pre-soak in a liquid detergent / water and then squeeze out wax/polish with your hands and rinse thoroughly. Hand or machine wash in hot (>150oF) water with liquid detergent (Auto-Fiber’s Micro-Restore) this will remove wax or polish, rinse thoroughly twice, do not use bleach (bleach will shorten the life of your Microfiber cloths.) Do not use fabric softener (most contain silicone that the towel will adsorb and it will weaken the towels static charge thereby reducing their effectiveness) towel will also treat the fabric softener as if it was dirt by trying to store the tiny particles of the softener in the towel fibres. This will clog up the micro fibres and render the towel ineffective. Add a quarter of a cup of distilled white vinegar in place of a softener, the vinegar doesn't coat the fibres but instead works to eliminate detergent residue. Be careful when machine washing or drying in mixed loads (Microfiber cloths will pick up lint from other fabrics.) Air dry or you can dry Microfiber cloths in any dryer on low heat, just be sure that the dryer does not dry at temperatures above 235 degrees F as Microfiber will melt if heated too high. Colours may bleed during first washing. Just recently, a cleaning solution was developed specifically for cleaning Microfiber towels, a product called Micro-Restore Detergent that claims to effectively remove dirt without using the bleaches and softeners commonly found in laundry detergents.
~Hope this helps~
Experience unshared; is knowledge wasted…/
justadumbarchitect *so I question everything*