OK need some polishing advice

1

1badtaco

New member
I have a white subaru legacy and I've decided to use my pc on it. I have meg's dacp, meg's #9 and s100 polish. And I've got two megs yellow pads and one megs white pad. I was going to try to remove some minor swirls and scratches not really anything intensive. I was thinking of going with the dacp on the yellow pad than straight to my s100 carnuba topper.



So here's the question. Should I step in with another milder polish 1st. Or would dacp than s100 carnuba be ok.. TIA.
 
I would

1. wash

2. clay

3. DACP w/ yellow pad

4. #9 w/ yellow pad

5. S100



#9 is to get the gloss back from DACP's aggressiveness. But since you said light scratches, try leaving out DACP on a test spot first.
 
I would do at least a light pass with a light polish or glaze on a white pad to touch up the minor marring that's going to occur with a high cut yellow/polish combo.
 
#9 is a light polish. On just about every car I have used #9 plus a yellow pad, I have had no micromarring. If the poster does have problems, you are right, he could switch to a finishing pad, but still use the #9.
 
thanx for the words of advice i decided to go with the dacp anyway and Iam starting on the #9 now...than I'll top with the S100 Carnuba but one last question is #9 really watery? cause mine is but it seems to leaving behind a nice slick finish.. thanx again
 
You must log in or register to reply here.
Back
Top