OCKlasse Detailed: Jet Black 997 C4S

OCKlasse

New member
Here is a Jet Black 997 C4S I worked on yesterday. The car had been detailed previously but was left with a considerable amount of defects. The front driver fender had sanding marks (from the factory I assume) that were not addressed, as well a fairly large scratch on the rear bumper.



You can see where the detailer attempted to buff out the scratch, and the paint around the area began to wrinkle due to the heat. The owner was very adamant about trying to remove as much of the scratch as possible, and I would say all things considered it came out pretty damn well. I used 2000 grit, and attempted to contain the removal of the scratch to as confined of an area as possible. I originally did not want to sand it, but I was coerced into it by the owner.



Total Time: 11 hours



Wash:



Karcher pressure washer

Camspray foam cannon

Chemical Guys Citrus Wash & Gloss

Home Depot grout sponges

Uber waffle weave microfibers

Uber microfibers

Swissvax detail brush



Wheels and Tires:



Chemical Guys Grime Reaper

Chemical Guys Wheel Gel

Swissvax wheel and detail brushes

Boar's Hair Brush

Finish Kare FX-100

Finish Kare 425

Finish Kare 108



Exterior Cleaning and Correction:



Meguiar's claybar

Finish Kare #425

Menzerna PO203S

Menzerna P083

Lake Country purple foamed wool

Detailers Domain blue finishing pad

Flex XC-3401 DA

Isopropyl alcohol between each pass

Chemical Guys EZ Crème Glaze

Finish Kare #1000P

Finish Kare #108

Meguiars mag and aluminum polish

Brinkmann light

3M painters tape



Interior Cleaning
:



Chemical Guys Leather Cleaner

Autogeek leather brush

Finish Kare 425

Finish Kare FX-100

Mièle vacuum



001.jpg


002.jpg


003.jpg


004.jpg


005.jpg


006.jpg


007.jpg


008.jpg


009.jpg


010.jpg


011.jpg


012.jpg


013.jpg


014.jpg


015.jpg
 
Back
Top