Ntx Pics

5

58fury

New member
Heres some of my shots from last Friday, NXT topped w S100, my overall first imp of NXT is a good one :thumbup: applied over entire car, then maybe waited for about 5+mins, buffed entire car, this product is very easy to buff off, no residue, buffs off basically simular to S100/PPG, i then topped w a quick coat of S100, love the shine! i still love S100 though, wipe on wipe off, no waiting to haze period, and no worries about mouldings ect, whereas the ntx you have to be extra carefull about that. heres some shots, next up ill try nxt w PPG ;)

ntx4.jpg


ntx7.jpg


ntx10.jpg


ntx13.jpg


ntx1.jpg


ntx5.jpg


ntx6.jpg


ntx9.jpg
 
for those you have tried NXT, let me know how long your waiting to haze period is, ill have to try diff times out??
 
4DR Turbo said:
for those you have tried NTX, let me know how long your waiting to haze period is, ill have to try diff times out??
Click to expand...



When I read that you buffed it off in 5 minutes, I was think that maybe that was not enough time. I let my NXT sit for about 30 minutes before buffing but I think 15 minutes would be the minimum.
 
Nice Work !

I waited about 15 minutes with no problems. I read on the bottle that you have to be careful about the trim after the fact.
 
nice job.

i just checked my bottle of nxt it is recommended to allow 10-15 minutes for it to cure. mike phillips also recommends applying a second coat 12 hours after the first one. if that isn't possible, after 1 hour.
 
hirosh said:
nice job.

i just checked my bottle of nxt it is recommended to allow 10-15 minutes for it to cure. mike phillips also recommends applying a second coat 12 hours after the first one. if that isn't possible, after 1 hour.
Click to expand...



yeah i believe the second coat will catch any missing parts and give it some more shine. something about the first coat needing to cure first i think.
 
Nice! :up



As much heat as NXT has taken by some for its durability (or lack of), there has not been much carping about its appearance.



I haven't tried NXT with S100 yet, just #16. I may have to bust out the S100 next time I top NXT.
 
Done, for my next application, ill let it haze for 15Min's, and apply a second coat, maybe 1hr later, not sure ill be able to let it sit for 24hrs?, and becks RE where to get S100, Bike dealers, in Ottawa, you can buy it from Harley Davidson dealers, or even Ott good time center, call first to make sure, last time i was at OGTC they had 3 jars on the shelf, $28/jar, as for PPG i had to order it from CMA $35
 
Oh ya, also for my next application, think ill use some painters tape for the mouldings ect, it would make the application go smoother ect
 
You must log in or register to reply here.
Back
Top