Need Help On Plan of Attack

[MTomlinson07]

I went out and bought a PC7336SP at Lowes today, ordered the Meguiars pad kit that comes with the backing plate, 2 polishing pads and 1 finishing pad, and some Poorboys SSR2.5 and SSR1. I already have some Meg's MPPC and 3M SMR. I am a complete newb at using a PC and was wondering if this plan sounds right and do I have everything I need.



Wash w/ Gold Class

Clay w/ Clay magic

SSR2.5 w/ polishing pad (don't know what speed)

SSR1 w/ polishing pad (don't know what speed)

NXT or #26 w/ finishing pad (don't know what speed)



Does this procedure sound good, should I throw in the 3M or MPPC in there somewhere?

 

[joshcaro]

That sounds right. No need for the Megs or 3m as the 2.5 and 1 will take care of that.



For the speeds what I do is start out with 1 just to get the area covered well and so that the polish does not sling when I induce higher speeds. I then bump it up to 4 for a few passes and then up to 5 and just work in until it dusts.



As for the NXT or 26, I would say use speed 1 or 2 at the most as it does not need any kind of pressure to give results really.