Need advice on a more aggressive polish

M

Mirror Images

New member
My car had to go in for some warranty work and was left out in the rain for 3 weeks of heavy rain followed by direct hot sunlight. I got the car back and there were a lot of water marks. I had my car virtually flawless before. I tried a more aggressive clay cession, I tried vinegar, I tried SSR 2.5, and megs fine cut cleaner with the PC 7424 and the lakewood orange pad. I got about 70% of them out. You really cant see the water marks in direct sunlight unless you angle your self low to the car. It is still driving me nuts. What product out there is a more aggresive than the SSR 2.5 and the megs fine cut cleaner that I can use with the PC and the lakewood orange pad. Thanks for your help.



JC
 
I don't know any that are recommended for PC use that are more aggressive. I've used SSR 3 via pc, and I was able to get good results (stepping down to 2.5 and 1 after), but I did that on a REALLY trashed finish (cracked paint, even!!). I would recommend just using what you've got a few more times.
 
Try the SSR3 at speed 6 with the orange pad x 2 on your horizontal surfaces followed up by either SSR 2.5 or 2 with a fresh orange pad. Finish up with SSR1 and a white pad at speed 5.
 
I would use a more aggressive pad with DACP like the LC yellow at speed 5.5 before using a more agressive polish. Try Powergloss if you want something stronger. The best bet is to use a rotary, but you might need to spend it out to a professional.
 
You must log in or register to reply here.
Back
Top