Natty's Paste Wax

J

JohnC

New member
Hey all,

I got my Natty's Paste Wax today, and I noticed something strange...

On the surface of the wax, there are some pink spots. Little ones, about 1mm in diameter. I can see 8 of these spots.

Any idea what these are? Should I dig them out, or should I just leave them there... and use it with the rest of the wax.
 
John...The spots are just some harmless dye from the manufacturing process. A few jars of the stuff got some of that. It's nothing at all to worry about.
 
Scott P said:
John...The spots are just some harmless dye from the manufacturing process. A few jars of the stuff got some of that. It's nothing at all to worry about.
Click to expand...
:yeah Scott is right. After the jars of Natty's were filled, they were left to cool off (without the lids). Some dye got splattered into the air and landed on the top of the wax. It should not cause any problems for you.
 
A quick question for the Natty wax users, do you guys wipe on - wipe off, let haze or wait a pre-deetermined amount of time (IE: 15 minutes) ?
TIA
 
I've tried many different Natty's application techniques. The one that works best for me is to use a regular round yellow foam applicator. Soak it with water, and then wring out until it's only slightly damp. A couple swipes across the top of the wax will cover about a 2'x3' section. Apply to the whole car, then go back to the first panel and start wiping off the residue. Poorboy's velvet smooth towel is my favorite for removing last step products.
 
wipe on the wait 15 seconds then wipe off damp applicator buff out to a nice shine.A very good product with nice durability
 
You must log in or register to reply here.
Back
Top