***My Methods For Opti-Coat Application***

:thx Awesome video, Anthoy! Thanks so much for posting that.



If you had to approximate, how much more product would you say you end up using by spraying as compared to the wipe-on method?
 
Also, don't you have concerns with the atomization of OC? Scares the snot out of me to think its flying around without so much as downdraft or some type of vacuum moving it.
 
Great video Anthony! Can you post any more info on the shop towel you were using over the latex glove. Most I've used I would think would be too course fabric or weaving to use and would risk marring the paint. Thanks in advance!
 
Thanks Anthony. I appreciate you taking the time to post this.



....and to Mike's point, Anthony does recommend wearing a respirator when spraying OS or OC. He mentioned this in another thread but it's definitely worth posting here as well. I always wear one when spraying OS.



Anthony Orosco said:
!!!When spraying both OS and OC please do wear a respirator for painting as it does atomize very fine!!!
Click to expand...
 
ironman1982 said:
Great video Anthony! Can you post any more info on the shop towel you were using over the latex glove. Most I've used I would think would be too course fabric or weaving to use and would risk marring the paint. Thanks in advance!
Click to expand...



That would be my concern too, perhaps a suede type of MF may yield the same result and be safer?
 
Bill D said:
That would be my concern too, perhaps a suede type of MF may yield the same result and be safer?
Click to expand...



That's what I'm thinking.... those blue MFs that CQuartz sends out for application of their coating.



These blue Scott shop towels are the same as folks have been using to apply spar urethane to headlights though... so maybe they're not a problem.
 
ironman1982 said:
Great video Anthony! Can you post any more info on the shop towel you were using over the latex glove. Most I've used I would think would be too course fabric or weaving to use and would risk marring the paint. Thanks in advance!
Click to expand...



That's what we thought also when first using them but that doesn't seem to be the case for most cars and paints. Now on something I know is soft, like Aston paint, I may reach for a sponge or microfiber material.



There are several "blue shop" paper towels floating around. I use the ones that feel almost spongy....stretchy.





wascallyrabbit said:
how much more do you use when spraying?
Click to expand...



You'll use a good deal more product when spraying. The advantage is more actives get to the paint, the final appearance, in my eyes, is better and for tight areas such as grills and wheels it's a no brainer. Disadvantage is you use more product.



So one professional syringe of OC will do one.....maybe two cars depending on size. Two smart cars, no problem!
 
Does OC and OS have non-respiratory friendly chems in it? I haven't seen any warnings or experienced negative consequences to using OS, but am curious now.
 
Anthony--I thought that you were supposed to just "lightly" wipe the OC to remove the high spots? Would you also suggest OC 2.0 be wiped with a MF towel as you did? Thanks!
 
Scooby24 said:
Does OC and OS have non-respiratory friendly chems in it? I haven't seen any warnings or experienced negative consequences to using OS, but am curious now.
Click to expand...



No they don't. Reason being is that they are "intended" for hand application. I though figured it should work nice if sprayed and after talking with Dr. G about it he said it should work fine, perhaps be the better method. So I gave it a go some years ago now and since I do some painting already I knew that spraying a liquid product would cause it to atomize thus easier to inhale. So a spray mask designed for spray painting is the safe way to go.



Anthony
 
pwaug said:
Anthony--I thought that you were supposed to just "lightly" wipe the OC to remove the high spots? Would you also suggest OC 2.0 be wiped with a MF towel as you did? Thanks!
Click to expand...



Hello, the wiping or "knocking down" (or leveling) step after OC has flashed is important so there are no hardened lines/streaks left over which are difficult to remove once cured. I use a "firm" pressure on the towel but not so much so that I may induce marring, just enough pressure to level high spots. Too soft of a touch and you're not really doing much.



Yes 2.0 can be done in the same manner.



And you're welcome!
 
You must log in or register to reply here.
Back
Top