Julius_911
New member
Hello,
Let's see after reading this forum for the last year if I finally get to graduate
I am preparing for the summer season and ready to attack my 1997 Green Maxima with deep swirls and return it to it's prime state. I would like to hear your comments and recommendations on my approach.
Here's what I have in stock so far:
Poorboy Super Slick & studs soap
Sonus Detailing Clay and Lubricatant
Menzerna IP
RMG
UPP
Meguire Gold Class Wax (not planning to used it)
Sonus Anti-Swirl & Gloss Enhancing Polish (Got it free and not planning on using it)
PC7424
Yellow - Restore Pad SFX-1
White -Enhance pad SFX-2
Blue Pad
To buy: FX-100, and #425 and maybe WG deep gloss sealant
Step 1
Wash Car
Clay
Step 2
Polish car with IP and remove as many swirls as possible with PC (with Yellow pad).
I might try that secret weapon of mixing IP and RMG
Step 3
RMG
UPP
UPP (again after 30 minutes)
UPP (and again)
FX-100 (and then wait 60 minutes)
#425
Step 4
When car gets dirty, wash, apply FX-100 and #425
Question:
Should I apply WG deep gloss sealant after UPP and before FX-100 in Step 3? Or is WG not needed at all?
:wavey
Thanks Guys, your help is very much appreciated..
Let's see after reading this forum for the last year if I finally get to graduate

I am preparing for the summer season and ready to attack my 1997 Green Maxima with deep swirls and return it to it's prime state. I would like to hear your comments and recommendations on my approach.
Here's what I have in stock so far:
Poorboy Super Slick & studs soap
Sonus Detailing Clay and Lubricatant
Menzerna IP
RMG
UPP
Meguire Gold Class Wax (not planning to used it)
Sonus Anti-Swirl & Gloss Enhancing Polish (Got it free and not planning on using it)
PC7424
Yellow - Restore Pad SFX-1
White -Enhance pad SFX-2
Blue Pad
To buy: FX-100, and #425 and maybe WG deep gloss sealant
Step 1
Wash Car
Clay
Step 2
Polish car with IP and remove as many swirls as possible with PC (with Yellow pad).
I might try that secret weapon of mixing IP and RMG
Step 3
RMG
UPP
UPP (again after 30 minutes)
UPP (and again)
FX-100 (and then wait 60 minutes)
#425
Step 4
When car gets dirty, wash, apply FX-100 and #425
Question:
Should I apply WG deep gloss sealant after UPP and before FX-100 in Step 3? Or is WG not needed at all?
:wavey
Thanks Guys, your help is very much appreciated..