Mitsubitshi Lancer exterior detail

fcuktion

New member
Hi all, have been learning alot from this forum and this is my 1st post in this section. Hope to learn more as i decided to go full time in detailing before i start school next year.



This Mitsu Lancer was covered with swirls,watermarks and quite a fair bit of RIDS.

Plan was to correct as much as possible with a 2 step detail. Only the exterior was done.



Wash



2 Bucket wash method

Grit Guard inserts

Lake Country Grout Sponge

Meguiars NXT carwash (Switching to ONR soon)



Wheels



Meguiars Wheel Brightner (4:1)

Meguiars APC (4:1) for tires and wheel wells

Swissvax Wheel Brush

Assorted brushes



Polish



Doors/Fenders/Bumpers/Bonnet

Meguiars M105 + Lake Country 5.5 Yellow Pad via PC 7424XP

Meguiars M205 + Lake Country 5.5 White Pad via PC 7424XP

Roof/Boot

Meguiars M105 + Lake Country 6.5 Purple Foam Wool via Rotary

Meguiars M205 + Lake Country 5.5 White Pad via PC 7424XP



LSP/Wax/Sealent



Blackfire Wet Diamond (Cure 24 hours)

Collinite 915 Marque D Elegance



Before

dsc0115kx.jpg


dsc0114a.jpg


dsc0117p.jpg


dsc0119dr.jpg




Test panel (rear passenger fender)



HD Uno was used and try out its cutting power as an AIO.



Combined with an LC Yellow Cutting pad and PC, it clear like 98% of the swirls in one pass.



But there was alot alot of difficulty removing the excess, was reading through Autopia and realised i am not the only, overworking the product was usually the culprit.



50/50 with HD uno followed by M205



dsc0129c.jpg




Decided to stick with the trusty M105/M205 combo.



dsc0130h.jpg




Fender

Before

dsc0156y.jpg


After

dsc0163c.jpg




The rest of the car excluding the roof and boot went through this combo with not much surprise.

dsc0155t.jpg




The carbon bonnet also had its fair share of RIDS/swirls

dsc0150zr.jpg




Cleared up except the weird but uniform pittings the bonnet had.

dsc0149m.jpg




The worst part was the boot.

Befores, under both halogen/Fenix L2D



Fenix

dsc0128k.jpg


Halogens

dsc0164xq.jpg




50/50 with 1 pass of M105 + PFW via Makita

dsc0165je.jpg




Left with some deep RIDS

dsc0166.jpg




Roof was also bad, covered with water marks and swirls with some deep and long RIDS

Before

dsc0117p.jpg


After - After M105/M205 cleared about 80% of the defects

dsc0169q.jpg




Overview of the reflection of the roof. =/

dsc0168z.jpg




Tail lamps before

dsc0173mw.jpg


Afters

dsc0172g.jpg




Some afters, but before the Collinite 915 application, will have pics updated soon as the sky was dark when the Collinite was applied. Its on Blackfire Wet Diamond in the following pictures.



dsc5834.jpg


dsc5853.jpg


dsc5836c.jpg


dsc5849.jpg




Thats all for now. Didnt have time for pictures after the 915 application as the owner was busy after that.



Cheers!
 
Awesome results, BFWD looks really good on that color!



I'd never realized how similar Lancers look when compared to EP civics until just now.
 
Thanks for your kind comments.

I just hope 915+BFWD will be lasting in my countries' weather, Singapore.



We are getting rain and shine here like every other day..
 
Back
Top