micro fiber washing techniques?

S

Spoons2k

New member
I tend to get a 5 gallon bucket and put 3 scoops of oxy clean then put about 4 gallons of fire hot water in and dump cloths in and stir them up a bit let sit for about 30-45 mins then use the washing machine with 1 scoop of oxy then dry on low heat

how do you guys take care of your MF's?
 
During the detail, I have 2 bins. 1 for good towels (paint only), and 1 for the other microfibers (jams, wheels, interior, etc..). I wash them seperately. I have a HD washer, so I use a scent free, pure detergent with no fabric softeners. Then I dry them with low heat, and no dryer sheet.
 
Spoons2k said:
I tend to get a 5 gallon bucket and put 3 scoops of oxy clean then put about 4 gallons of fire hot water in and dump cloths in and stir them up a bit let sit for about 30-45 mins then use the washing machine with 1 scoop of oxy then dry on low heat

how do you guys take care of your MF's?
Click to expand...

I don't think you're supposed to use hot water on MF towels, but hey, if it works for you....:cool:
I just throw them in the washer and use non-scented detergent. I then tumble dry on low heat.:)
 
Termigator said:
I don't think you're supposed to use hot water on MF towels, but hey, if it works for you....:cool:
I just throw them in the washer and use non-scented detergent. I then tumble dry on low heat.:)
Click to expand...

i think the heat just pertains to the drying not the water... if im wrong please let me know but i have been doing it for years and my mf's still work like their brand new
 
I also segregate into two wash loads... paint and grunge.

The "paint" load goes into the washer first with warm water, Tide detergent, 2 scoops of Oxyclean, 2 cups of Purple Power. Then into the dryer, no dryer sheet.

I repeat the process for the "grunge" load.

Then I have to wipe the interior of the washer with Purple Power to clean up the "ring"... haha:D
 
Warm wash / cold rinse with a scent-free detergent. After the spin cycle, I initiate a second rinse and add a half cup of white vinegar. Air dry.
 
Luster said:
I also segregate into two wash loads... paint and grunge.

The "paint" load goes into the washer first with warm water, Tide detergent, 2 scoops of Oxyclean, 2 cups of Purple Power. Then into the dryer, no dryer sheet.

I repeat the process for the "grunge" load.

Then I have to wipe the interior of the washer with Purple Power to clean up the "ring"... haha:D
Click to expand...

haha THE Black Ring is what i guess your reffering to lol

i found out that if you presoak the clothes in a bucket first you eliminate the ring in the washer adn it stays in the bucket and the Mf's tend to come out alot fluffyer
 
Micro fibre Care

Proper care is simple; to ensure your towels and buffing cloths provide long-term use, wash them frequently after every use and as soon as possible, in a liquid soap (Micro Restore) in hot 120oF< (48oC <) water, add a teaspoon per towel distilled white vinegar, the vinegar doesn't coat the fibres but instead works to eliminate detergent residue (do not use fabric softener) in the rise cycle, and finally a thorough cold rinse. Always wash micro fibre separately and only with other micro fibre fabrics. Use the hot setting on dryer, no softener sheets (your towels will not melt)

If this doesn't completely clean them use distilled water, place your towels in the pan and bring to a slow boil for 10 to 15 minutes. There will be a film that rises to the top of the water which you should skim off (these are minerals and impurities found in regular tap water) Drain the water from the pan before removing the towels, and then hang the towels to air-dry.

Regardless of material type or quality, a dirty micro fibre, or a 100% Cotton towel will scratch, micro fibre has attractant properties, that is dirt, dust, and various other substances cling to it, which is one of the reasons that it works so well, but it is also a reason why you need to be extra careful when using towels on your paint


Extract from ?Micro fibre (Microfiber) Towels ? one of a series of in-depth detailing articles by TOGWT ?
 
Spoons2k said:
haha THE Black Ring is what i guess your reffering to lol

i found out that if you presoak the clothes in a bucket first you eliminate the ring in the washer adn it stays in the bucket and the Mf's tend to come out alot fluffyer
Click to expand...

LOL,,,, Yes I'm referring to the "Black Ring"; Kinda like the "Black Hole"!!!:eek:

I'll try pre-soaking them first. The bucket is easier to clean up!:scared::thumbup::thumbup::thumbup:
 
Hot water wash with detergent, may be "boosted" with Oxyclean, Borax, BioKleen (APC or Bac-Out) as needed.

Fill your fabric softener dispenser with 5% white vinegar (@1/2 cup), measuring tsp/towel is a waste of effort IMO. At the end of the first rinse, check the amount of suds in the water. If it looks excessive, a second rinse may be beneficial. If not, why waste the electricity/water to little or no benefit?

Dry on LOW heat or air dry. I prefer the former for time sake and the Wife doesn't care for the clutter. HOT dryer temps lead to over drying which unnecessarily promotes static electricity. The damage to the towels may never present itself, but there are very few fabrics which benefit from excessive heat.
 
i really just presoak them first because the washer i have is a front load washer and i just cant ruin it completly just yet
 
I thought I would bump this old thread to see if anyone is trying anything new. I usually hang my towels and allow them to air dry. Today I'm going to use some dryer balls that I came across. Does anyone else use them?

BTW, this is going to be my process for today. 24 new misc. use mf towels washed with two ounces of mf restore and unscented soap. Final rinse will receive 1/2 cup of vinegar in rinse cycle. Once in the dryer, they'll be dried using warm air and dryer balls.
 
I have always washed my micro's seperately, in cold water (vinager, cleaner solution I mix at our factory) and no fabric softener. I line dry instead of using the dryer to avoid a static charge on the micro's. I got this tip from Terry (the king of MF). From what I understand from the previous posts you folks are using the dryer and not getting the static. If this is a fact, please let me know as I would love not having to line dry 100 microfibers at a time. As you can imagine... it's a pain. Please let me know.

Matt
 
matt@wheelwax said:
I line dry instead of using the dryer to avoid a static charge on the micro's. I got this tip from Terry (the king of MF). From what I understand from the previous posts you folks are using the dryer and not getting the static. If this is a fact, please let me know as I would love not having to line dry 100 microfibers at a time. As you can imagine... it's a pain. Please let me know.

Matt
Click to expand...

I think the dryer adds static to the towels, too. With the new HE washer, the towels are pretty dry after the wash and they air dry pretty quick. However, the dryer tends to fluff the thicker towels up better.

For those that use Oxyclean, doesn't that go against the convention of 'no powdered detergents, liquid only' for MF's?

Randy
 
ZimRandy said:
I think the dryer adds static to the towels, too. With the new HE washer, the towels are pretty dry after the wash and they air dry pretty quick. However, the dryer tends to fluff the thicker towels up better.

For those that use Oxyclean, doesn't that go against the convention of 'no powdered detergents, liquid only' for MF's?

Randy
Click to expand...

You're right, it does. However, today I found that when you put the towels in the dryer, the key to keep the static from building up is to take them out a couple of minutes before they fully dry and let the remaining heat that is trapped in the pile of warm towels finish the job. My first load had a lot of static but the rest came out pretty good with very, very little to no static at all. The dryer balls helped alot. The trick was to place one on the bottom and one in the middle of the stack of towels in the dryer. I'm pretty sure that I would have had better results with two more in there.
 
I purchased a programmable front load h.e. washer and dryer a few months back. I programed in settings for microfiber (paint and grunge), terry and surgical towels. Microfibers get a prewash with liquid Oxyclean, main wash with warm water and Micro-Restore, and a cold water double rinse with a cup of white vinegar. The grunge towels get the same but have a 20min. soak during the main wash. Micros get low setting on the dryer and fluff air to finish.
 
You must log in or register to reply here.
Back
Top