Menzerna FTG

[roybiggens]

I will be trying Menzerna FTG for the first time this weekend, in fact this will be my first experience with a true "glaze". I've read where it can be difficult to remove. I was wondering if anyone had any suggestions as far as application, amount, or removal that might make the process easier.



Just so you'll know my plan is:



FPII x 1

FTG x 1

FMJ x 2



Thanks

 

[Trbogolf]

I followed the instructions on properautocare.com. I'm sure someone on here has some suggestions as well but here's a cut/paste.

Work on areas of 2 to 3 square feet. Apply two, 8 inch lines of glaze on the paint. Using a White Foam Polishing Pad or the new Black, Hi-Gloss Glazing Pad, spread polish over the surface. This coats the pad and the surface with glaze. Set the Porter Cable's speed control between 3-1/2 and 4. Place the pad on the paint and turn the polisher on. Work over the area in a figure-8 pattern until almost dry. Wipe off glaze residues with a dry Microfiber cloth. Continue glazing in 2 to 3 square foot sections until vehicle is done.

It worked great for me. Just stay out of the sun and work on a cool surface. Removal was fairly easy. Just look the surface over really well before moving on to the next panel.

I was experimenting the other day and found that FTG doesn't like to come off a hot surface very well.

 

[roybiggens]

Thanks, I read that same info on Properautocare and it looks pretty straightforward but it seems like quite few people have had some difficulty removing it. I'll givr it a try just like they way and go from there. Thanks again!!