Meguiar's M95 Speed Cut question

H

Holty

New member
RE: Meguiar's M95 Speed Cut



My wife's Black Acura TL is a mess. Crazy scratches, acid rain marks, etc.



Is this the best product to use if being apply by a PC 7424?



If not, what should i use?



If so, do i start with the Meguiar's M95 Speed Cut then go to the M105, then M205?



THANKS!
 
M95 is not specifically approved or recommended by Meguiar's for use via dual action polisher.



You should pick up the NEW formula of M105 (same level of cut) and try that on your DA. I would also suggest getting some M205 for your finishing step to make it a 2-step detail.
 
Most Acura paint is pretty soft....I should know...I own a TL. I've gotten pretty good correction from SIP/White pad.



Remember, always try the least aggressive method first.
 
EisenHulk said:
Most Acura paint is pretty soft....I should know...I own a TL. I've gotten pretty good correction from SIP/White pad.



Remember, always try the least aggressive method first.
Click to expand...



+1... try M205 with white LC pad or 9006/polishing Meg's pad
 
I used to have an 08 Accord - I could get out cat scratches with Menzerna FFII and a LC orange pad on a PC.
 
You must log in or register to reply here.
Back
Top