Meguiars 80 then what?

[jax]

This is what I have plan for my next detail:



wash

clay again

meguiars #80

maybe meguiars #7?

aio

sg

#16



any advice will be appreciated!:xyxthumbs

 

[scottabir]

drop the #7 out of the routine if you are going to use the K-twins. The AIO will take it off and you will have wasted a half hour. *I* would try the combo without the K-twins first to see if you like it. or at least do maybe half a hood with one and the other other half with the other combo.

 

[stilez]

Yeh, I'm with scottabir...



AIO will remove all of #7's oils.



The combo that is hitting the boards big time now is #80/VM/EX-P. You may wanna give that a try.

 

[Jesstzn]

#80 being a glaze does it have any abrasive powers or is it oils and fillers?

 

[SpoiledMan]

It is abrasive but breaks down really quick. As far as the fillers I don't think so and it doesn't seem oily when removing it.

 

[imported_edschwab1]

#80 being a glaze does it have any abrasive powers or is it oils and fillers?

my take is:

75-80% abrasive (On meg's scale #80 is a 4)

20-25% TS oils, polymer sealant and fillers



Eric

 

[Scottwax]

You can go #80 straight to #16 and get 98% of the look with a lot less effort.