Juan@Turbo Wax
New member
Mazda Speed 6
Detailed by Turbo Wax Detailing with Turbo Wax Products.
Process:
Turbo Wax Car Shampoo
Turbo Wax Oxidation Block ( Similar to the Clay Bar)
Turbo Wax Wheel Cleaner
Turbo Wax Wheel Stick
Turbo Wax Swirl Remover via Porter Cable 7424XP with Orange Foam Pads
Turbo Wax Medium Compound via Porter Cable 7424XP with Orange Foam Pads
Turbo Wax Tire & Exterior Trim with Polycharger
Turbo Wax Car Wax with Polycharger via Porter Cable 7424XP with Black Foam Pads
Turbo Wax Spray N Wax with Polycharger
I had the opportunity to get my hands on this 2006 Mazda Speed 6 with only 20,000 Miles on it. The car has been sitting outside for months. The faded paint was noticeable almost instantly and a closer look revealed the overwhelming amount of water spots on the roof surface.
After the washing and oxidation removal process the roof surface was evaluated and I concluded that the roof was in need of multiple steps to be able to bring the surface back to an acceptable condition.
Roof as found, under a digital microscope.
In reality no microscope was needed as the surface damage was visible. :sad:
50/50 Roof view left side as found right side corrected.
Roof Fully Done
Rest of the car completed
Thanks for looking
Detailed by Turbo Wax Detailing with Turbo Wax Products.
Process:
Turbo Wax Car Shampoo
Turbo Wax Oxidation Block ( Similar to the Clay Bar)
Turbo Wax Wheel Cleaner
Turbo Wax Wheel Stick
Turbo Wax Swirl Remover via Porter Cable 7424XP with Orange Foam Pads
Turbo Wax Medium Compound via Porter Cable 7424XP with Orange Foam Pads
Turbo Wax Tire & Exterior Trim with Polycharger
Turbo Wax Car Wax with Polycharger via Porter Cable 7424XP with Black Foam Pads
Turbo Wax Spray N Wax with Polycharger
I had the opportunity to get my hands on this 2006 Mazda Speed 6 with only 20,000 Miles on it. The car has been sitting outside for months. The faded paint was noticeable almost instantly and a closer look revealed the overwhelming amount of water spots on the roof surface.
After the washing and oxidation removal process the roof surface was evaluated and I concluded that the roof was in need of multiple steps to be able to bring the surface back to an acceptable condition.
Roof as found, under a digital microscope.

In reality no microscope was needed as the surface damage was visible. :sad:



50/50 Roof view left side as found right side corrected.

Roof Fully Done


Rest of the car completed









Thanks for looking
