marring haze holograms on soft paint hd advanced cut hd polish

[hdspeed]

Marring haze holograms on soft paint from hd advanced cut on my jet black bmw. The steps I took are below.



3d wash wax

hd clay bar with 3d final touch lube

porter cable with hd orange cutting pad speed 6 moderate pressure hd uno advanced cut small amount used 3 passes

extreme difficulty removing hd advanced cut huge marring left behind.

followed up with hd advanced polish small amount used speed 6 on blue hd polishing pad buffed until could no longer see polish.

I cant seem to remove the dull white swirly hologram hazy whiteness left behind by hd uno advanced cut.

I thought I had removed it and followed with nitro seal but when I take my car in direct sunlight it is filled with the swirly marks (see video)



Hazing HD Advanced Cut - YouTube



Any tips on what I can do to remove the haze? Thank you.

 

[pwaug]

When polishing or finishing with HD Polish and a softer pad like the green or blue I usually use speed 3 or 4 on my GG DA with light to medium pressure and slow arm speed for two or three passes.