PAR Detailing
New member
Ok so I have a Marauder here. Mike (the client) was referred to me by Steve the owner of the Black Marauder I did previously.
This Marauder was red with some minor swirling and just normal wear and tear of life. Upon inspection the top surfaces were in much rougher shape than the sides due to water etching so I decided to go with a 2 step on the top surfaces and a 1 step was sufficient for the sides.
Products:
Flex 3401
D300 w/ MF cutting disc (Hood)
Uber Orange w/ Gtechniq P1 (Top of trunk and roof)
Uber Green w/ Menz 203 (Whole Car)
Seal w/ Blackfire Wet Diamond
Wax w/ Nattys Red
My process was:
Wash and foam with OPC
Wash with a mix of Dawn and Car wash soap
Dry with Guzzler and Leaf Blower
Polish paint (See above)
Dress tires with DP
On to the Pics
The Wash Process
Taped Up
Befores:
50/50
This Marauder was red with some minor swirling and just normal wear and tear of life. Upon inspection the top surfaces were in much rougher shape than the sides due to water etching so I decided to go with a 2 step on the top surfaces and a 1 step was sufficient for the sides.
Products:
Flex 3401
D300 w/ MF cutting disc (Hood)
Uber Orange w/ Gtechniq P1 (Top of trunk and roof)
Uber Green w/ Menz 203 (Whole Car)
Seal w/ Blackfire Wet Diamond
Wax w/ Nattys Red
My process was:
Wash and foam with OPC
Wash with a mix of Dawn and Car wash soap
Dry with Guzzler and Leaf Blower
Polish paint (See above)
Dress tires with DP
On to the Pics
The Wash Process


Taped Up

Befores:










50/50

