Making your own velcro backing plate for a PC?

V

viper_chan

New member
I'm thinking of maybe converting the 5" sanding backing plate that came w/ my PC 7424SP into a custom velcro backing plate. Has anyone tried doing something like this before? If the various velcro backing plates for sale are anything like the rubber sanding ones, this should be no problem. Suggestions & Comments are welcome....:confused:
 
I'm really surprised that nobody has thought about making their own backing plate considering the insane prices for us canadians? I see that my post has been viewed about 60 times so far, but no comments? :confused:
 
Well, I want a small maybe two inch plate and then cut up some old foam PC pads to fit. I need this to work in tight spots. I don't have a clue as to how to do this.



Good luck



I would even pay ten bucks for a two inch plate that fits the PC
 
I know you can buy velcro with a sticky backing. It seems like a great way to save money: stick on some velcro to the existing rubber backing plate. As long as the velcro is sturdy enough, I don't see why it wouldn't work. I agree with Viper chan, someone had to have thought of this before.



I say, if the velcro seems sturdy enough, it should work great. Anybody have any objections?
 
I went to Lowes to check out the PC 7336SP I read people talk about on here. I ask the clerk if they sold a hook and loop backing plate for it he said no but they had an adhesive hook and loop disc to go on a backing plate but it was for a 5" backing plate not the 6" that comes with the PC 7336SP. It was made by Porter Cable in section with sanding disc.
 
I bought a 3M 6" Hookit Disc Pad (PN-99858) for approximately $15.00 (CDN) as I also use my PC for sanding. This sanding disc come with dust evacuation holes (6) but I believe there is a solid version as well. I was able to buy this disc at the same tool supply shop where I bought my PC (this was before CTC had them). Anyway, the 3M Hookit discs are a possible cheaper alternative and they seem to have industrial grade velcro hooks. It takes a lot to wear them out.



Cheers
 
I did just what you are talking about. I found a kit at Sears. It had glue, two "hook" pads, and and the instructions. The pads were only 5", but the glue has held the pad on through a lot of use. I use the Meguiar's 6" buffing pads and they stick just fine (no slipping or sticking in one place). I have the extra hook pad for when the first wears down. I have not been able to find the kit, recently. But that may just be the store where I am looking. This may be very similar to what you saw at Lowes. Don't get too hung up on the 5" diameter. It should provide plenty of surface area for the pad to stick.
 
I dropped by my local Home Depot after work today and found a 5" Velcro stick-on to convert regular sanding pads into a velcro backing plate. Only $3.64 cdn / $2.28 us.....not bad at all! :xyxthumbs



Here's a couple pics of my setup:



P8140088.jpg


P8140001.jpg


P8140096.jpg


P8140097.jpg
 
Viper_chan, is that the 6" Simoniz buffer pad from Canadian Tire? How's this combo working out if you've used it? Do you use it for polishing and "heavier" stuff, or just for light work?



This looks like a nice easy route to go without having to buy a backing plate or change counterweights. Just buy a 7335 or 7336, and a few dollars later you're set. :up
 
4DSC said:
Viper_chan, is that the 6" Simoniz buffer pad from Canadian Tire? How's this combo working out if you've used it? Do you use it for polishing and "heavier" stuff, or just for light work?



This looks like a nice easy route to go without having to buy a backing plate or change counterweights. Just buy a 7335 or 7336, and a few dollars later you're set. :up
Click to expand...



yes it is....I actually haven't tried it out on anything yet. The Simoniz pads were dirt cheap too....$8cdn for two.



I'm thinking about giving it a try on my mom's '90 accord to see how it goes. I've got some meguiars pads on order that I'll use on the gti. :)
 
viper_chan said:


yes it is....I actually haven't tried it out on anything yet. The Simoniz pads were dirt cheap too....$8cdn for two.
Click to expand...
I know! :) I'm trying to see if I can lower the admission cost of PC ownership, so if these pads can be used instead of specific "polishing pads" I'd sure like to know (I know, I know, they say "buffing pads" :rolleyes: ).



Please keep us updated!
 
The velcro loop section on the pads goes right to the edge of the pad. :scared For me, that would be very high risk at creating a very deep scratch! Depending on the contours of the car - especially the trunk and completing the lower half of the car. I find myself in some ackward positions. The Meguiars pads have a buffer zone in that the velcro only goes out about 2/3 of the pad. :up Thereby, having a nice safety net in the event that need to compress the pad around a weird angle. :cool:



That picture you provided you looks pretty scary!



Let us know how the DIY velcro pad works out - I'm sure many would like to know. :xyxthumbs



Paco
 
viper_chan said:
I'm thinking of maybe converting the 5" sanding backing plate that came w/ my PC 7424SP into a custom velcro backing plate. Has anyone tried doing something like this before? If the various velcro backing plates for sale are anything like the rubber sanding ones, this should be no problem. Suggestions & Comments are welcome....:confused:
Click to expand...



just go to any carquest and get the 5 inch norton backplate with velcro for around twenty bucks... i like it better than the original
 
I just rigged my pneumatic da 6" to use velcro polish pads using spray adhesive. Elmers brand.



The can says to spray it on and let it dry for a few minutes then stick whatever to it for a temporary bond. Works fine, and I can still use my sticky sandpaper should I ever want to again.



Just sprayed some on the backing plate thing on that glossy plastic that the sandpaper normally sticks to, and bam- instant da polisher..



Probably be looking for the conversion kit tho..



Ya know, sears has 6" pads that look just like those pictured way above white foam for 1.98 ea.
 
You must log in or register to reply here.
Back
Top