LSP for Grand Prix White Honda

R

Rsxer

New member
First I want to say that you guys are extremely helpful and knowledgeable and I will be totally lost without you guys.



I recently purchased a White Honda S2000 and was wondering what combination of sealant and wax should I purchase. Would I need a glaze?



I have never dealt with white and more used to black where i used RMG and Natty blue.



I was thinking for a LSP either P21S 100% or Natty red or CG 50/50.



What do you guys think. Open to suggestions :)



Also what do you guys think of the Sonus 6 inch pads. It seems like a majority of people use the LC pds?



Thanks in advance for the help.
 
If you are used to black, then white should be a breeze. White obviously gets the same swirls,rids, etc as black but are much less noticeable. Looks like you are more of a "nuba guy" from the products you are thinking about, in which case the ones you have listed will be fine.



Just to add another one for you to ponder over, is liquid souveran. I have seen many great looking posts where LS was the LSP on white.



An economical, easy to use, sealant combo for white is duragloss 501 followed by dg105 and touched up a day later with dg aqua wax.



Good luck, I really like the s2000's.
 
use Meguiars #9 polish/glaze then follow up with Collinite 915 you should only have to repeat this process say three times a year.
 
White / Silver / Light colored cars are even more of a challenge to get to really shine.



The same level pf work needs to be exerted to level the clear coat.



In terms of LSP for light colored cars (whiet/silver in particular), I have found that Duragloss 501, followed by Duragloss 105 does a superb job. After the 105 has cured for 8-12 hours hit it with some Duragloss Aqua wax and enjoy the bling
 
I much prefer synthetics on white than wax's. Synthetics sealants hold the look longer and offer more bling which is what you want on white in my opinion. Fk1000P, Z2 Pro, Optiseal,Ultima, etc etc
 
Klasse Twins or Klasse all in one followed by a Collinite.



Meguiars #9 polish followed by M20 Polymer Sealant
 
You must log in or register to reply here.
Back
Top