Harleyguy
New member
Here's one I did a few weeks a go .
As usually I was approached at the last minute to try and clean up this car after it was loaned out to a customer who obviously didn't care how he treated the car .
I had a couple of things not really in my favor when it came to detailing this beast . First thing was they wanted the car done in less then a day and I also was going out of town the Thursday and Friday of last week . So the only time I would have would be Tuesday and hope for the best .
I remember when Dana detailed a Lambo and the many times I spoke to Todd Helme about detailing Lamborghini's how hard the clear coat is . Well that was an understatement the clear coat on this car was laughing at what ever I tried on a test spot . Onto the detail Thanks for looking
Products used and tried
Makita Rotary
Flex 3401 VGA
Cyan and Tangerine Hydro Tech Pads
PFW pad
Assorted Brushes
Master Blaster
3M Ultrafina and Blue UK pads
Used Fuzion as my LSP no time to seal paint
Stoners glass cleaner
105/205/UF
And a bunch of other products
My goal was to get as much as the swirls out I could and leave the rids to the next time I tackle the car .
Onto some pictures
Before various pictures from the flat surfaces
This the way the paint looked after PFW kinda dull and hazy
After wool 105/205 on Hydro Tech pads
Finished and some sun shots
Polished Carbon Fiber door panels you can see the light rays shining across the inside of the car
As usually I was approached at the last minute to try and clean up this car after it was loaned out to a customer who obviously didn't care how he treated the car .
I had a couple of things not really in my favor when it came to detailing this beast . First thing was they wanted the car done in less then a day and I also was going out of town the Thursday and Friday of last week . So the only time I would have would be Tuesday and hope for the best .
I remember when Dana detailed a Lambo and the many times I spoke to Todd Helme about detailing Lamborghini's how hard the clear coat is . Well that was an understatement the clear coat on this car was laughing at what ever I tried on a test spot . Onto the detail Thanks for looking
Products used and tried
Makita Rotary
Flex 3401 VGA
Cyan and Tangerine Hydro Tech Pads
PFW pad
Assorted Brushes
Master Blaster
3M Ultrafina and Blue UK pads
Used Fuzion as my LSP no time to seal paint
Stoners glass cleaner
105/205/UF
And a bunch of other products
My goal was to get as much as the swirls out I could and leave the rids to the next time I tackle the car .
Onto some pictures
Before various pictures from the flat surfaces
This the way the paint looked after PFW kinda dull and hazy
After wool 105/205 on Hydro Tech pads
Finished and some sun shots
Polished Carbon Fiber door panels you can see the light rays shining across the inside of the car
