Klasse Twins Usage

T

ToddW

New member
I just got a bunch of new products *to me* and the Klasse Twins were in there... I`m curious on effective ways of using them.



Layering?

Time to leave on to 'absorb/settle'? (For each? [SG & AIO])

What polishes work best if any before AIO? (AIO removes them?)

Can you top SG with carnuba or is not recceomended?



Just curious what ways people use it and what works best...
 
Wash your car...



Then claybar the entire thing, until you get a smooth surface....



Then apply Klasse AIO - wipe on, wipe off



Then if you have swirls remove them with an abrasive polish



Then put on the SG, wipe on wipe off, you should wait 24 hours between coats



Yes you can top SG with a carnuba, such as S100 or P21s
 
I would actually Remove the swirls first, then use AIO as AIO is a chemical cleaner and will remove any stuff that the polishes leave behind and its also the perfect base for SG. You can also apply SG.. very thinly.. and let it sit untill it dries and then remove with a QD. Some people have reported problems in taking it off after using it this way, but if you apply it thinly enough you should not have a problem removing it.
 
Yep I'd use the swirl-remover first as well. AIO provides a layer of acrylic protection so you don't want to use a polish after AIO and remove that protection.
 
Thanks guys.





I was looking for advice regarding the Klasse Twins specificaly as well as polishes that work well with them. What to use before to remove scratches, and or contaminents... Igot that down :)



Thanks agian!

-Todd
 
I like the SSR line of polishes for use all the time. It doesn't really matter what polish you use beforehand. The only thing to think about is whether that polish has oils or fillers that you want on the paint. If you used a cleaner after that, you'd remove those oils/fillers.
 
You must log in or register to reply here.
Back
Top