Klasse AIO or Optimum Poli-seal?

M

MCWD

New member
I am wondering if anyone has a preference between these two products on results and staying power... Any takers?:waxing:
 
IMO... :nervous:



AIO= great Chemical cleaner, No correction, very little protection



Poli-seal= some correction, good protection



(you did not ask but HT-69 offers more correction, maby a tad better protection

and is cheaper;))
 
I don't think I've touched my 1/2 full bottle of AIO since I started using Poli-Seal. Nothing wrong with AIO, but OPS cuts more and has a better look.
 
I like to use Poli-seal with my Cyclo and green pads, wipe off with OCW. I use AIO only clean up door jambs and such. It's a great cleaner, but Poliseal works soo much better with a machine. And like mentioned, the durability of AIO isn't very impressive.
 
XMT 360 is a great AIO. I did a half and half on a new silver Tundra a few months ago using poliseal and 360. The 360 side had so much more of a glow that I had apply it to the other (poliseal) side also so it wasn't noticeable. It does more correction but doesn't last as long as poliseal though.



Nice tip on the high temp BTW.
 
Now to throw a wrench into the mix, for those of you familiar wither either Klasse AIO, Poli-Seal, or both- what are your feelings on D151?
 
Lumadar said:
Now to throw a wrench into the mix, for those of you familiar wither either Klasse AIO, Poli-Seal, or both- what are your feelings on D151?
Click to expand...



D151 does a good job, but I haven't made up my mind as to which one is better. I feel as if the D151 is geared more toward high volume shops, whereas OPS gives you a cleaner shine and look. It may be all in my head but those are my feelings. What does everyone see the OPS lasting for???
 
My vote goes for Poli-Seal. I've used D151 a few times and don't care for it on a DA, maybe because I'm so spoiled by PS on a DA. D151 works well on a rotary though. KAIO is a good chemical AIO, but like others have said, no cutting ability.
 
Klasse AIO is an excellent cleaner, and adds a nice shine. Poor protection.

Great for cleaning rims and door jambs as well.



Optimum - hv not tried before.
 
[
mshu7 said:
Do ii. You won't be disappointed.
Click to expand...



Thanks for the advice. Put in an order from eShine.ca. Should be here by next Tuesday & can't wait to try it out.



Another question:

My car was just recently clay bared, applied one coat of Megiar's #26 & a week later one coat of Meguiar's NXT 2.0. To apply Poli-seal, what shall I do first?

Any recommendations would greatly appreciated.
 
Sooo.... to clarify some items for myself. Klasse AIO is more so a chemical cleaner than anything else?



Whereas Poli-Seal is a very fine polish, as it were to "mechanically" clean/polish a surface?



I'm looking into Poli-Seal specifically for glass. I've has success with Klasse AIO for my windows and the protection lasted a decent amount of time. It appears that the Poli-Seal may be a better choice as it may refine the surface, in addition to creating a layer of protection?



Am I all over it?
 
You must log in or register to reply here.
Back
Top