Just Missing a great swirl remover

M

mystickid

New member
guys,



I gota a Jet Black car with lots of swirls. I need a recommendation for a really really good swirl remover in my processand i think that would do it. heres my process:



1) Gold Class Car wash

2) Clay Magic â€â€œ Clay + Lubricant

3) --- Insert Best Swirl remover here------ ???

4) Sonüs Paintwork Cleanser

5) Klasse All-IN-One

6) 4 Star UPP ( Is this in the right place here ???

7) Eagle One â€â€œ Nanowax or Gold Class Liquid Wax

8) Topp of with P21S Carnuba Wax



Occasioanlly - Sonus Acrylic Spritz for as a QD





Please i need a great swirl remover for hand application not a PC.



Thanx a MIllion
 
Meg's #80 and # 83 are available at most Auto paint supply stores and they work wonderfully.



And you certainly do not need step # 7 in your regimen above.
 
Another choice that works well by hand is 3M PI-III RC and MG (05933 and 05937). These have recently been replaced with similar products in the PI-3000 line but are still commonly available. One nice thing about these is that they don't leave anything behind to conceal leftover marring which the AIO might uncover. FWIW, these are what I always use when applying the Klasse twins.



I dunno, but the FPII and SSR1 might be too mild unless you have *very* light marring and very soft paint.



I too would skip step #7.
 
thanx fer thee advice guys.



I'm only using step # 7 because I read that P21s doesn't last that long especially if you don't have a garage and I don't.



Shall I still drop it?
 
Yes, I would still skip it. P21S will last awhile and you can just reapply in a few weeks (or) when you think its nessessary.
 
You do not need step 4 and 5. Both products are pre wax/sealant cleaners. Choose one or the other but no need for both. You can't go wrong with either one they are both excellent products.
 
mystickid said:
guys,



I gota a Jet Black car with lots of swirls. I need a recommendation for a really really good swirl remover in my processand i think that would do it. heres my process:



1) Gold Class Car wash

2) Clay Magic â€â€œ Clay + Lubricant

3) 3M PI III RC by PC or ScrathX by hand (good luck)

4) SKIP- Sonüs Paintwork Cleanser

5) Klasse All-IN-One

6) 4 Star UPP Layered w/ 2 coats, maybe 3

7) SKIP - Eagle One â€â€œ Nanowax or Gold Class Liquid Wax

8) SKIP - Topp of with P21S Carnuba Wax
Click to expand...



I updated your list. I removed a few stpes I felt were unneccessary. Most will agree about 4 and 7, but some may disagree about skipping 8. I personally feel that UPP looks best w/o a topper. You will be impressed, skip the P21S step for now. If you want to use the wax then use a different sealant or glaze, VM maybe!!



Also, I HIGHLY suggest using a PC or similar, you just wont get the results w/o proper prep and proper prep on a badly swirled black car is next to impossible by hand. It will take you 30 hours of rubbing to accomplish the work of 2 hours on a PC. It doesn't matter what sealant/wax/glaze or combo of anything you use if the paint is not prepped clean & swirl free.



If you go w/ the hand route, good luck! And post some pics when you're done.



PS: Might I also suggest the 4* Gloss Enhancer as your QD!
 
You must log in or register to reply here.
Back
Top