Jeep Rubicon correction and Opti-Coat Pro

white gecko

New member
A good friend and client of mine had me out to do his Jeep Rubicon.  It gets used a lot off road and he wanted the paint protected permanently so I did a 2 step correction which yielded about 90% on the hard Jeep clear and then finished it off with Opti-Coat Pro.  Two days went into this rig.





Upon arrival at his home

 
JeffsRubicon3.jpg


JeffsRubicon5.jpg


JeffsRubicon4.jpg


JeffsRubicon7.jpg


JeffsRubicon9.jpg


JeffsRubicon8.jpg


JeffsRubicon10.jpg


JeffsRubicon12.jpg







Condition was a bit rough....swirls, RIDS, overspray, and DA sanding marks were all over the body.

JeffsRubicon13.jpg


JeffsRubicon14.jpg


JeffsRubicon15.jpg


JeffsRubicon16.jpg


JeffsRubicon17.jpg


JeffsRubicon18.jpg







Getting there...

JeffsRubicon19.jpg







Some of the DA sanding marks and pigtails

JeffsRubicon21.jpg






Before

JeffsRubicon20.jpg






After


JeffsRubicon22.jpg


JeffsRubicon23.jpg







Correction and coating all finished.  Completed late at night, so no sun pics.

JeffsRubicon37.jpg


JeffsRubicon36.jpg


JeffsRubicon38.jpg


JeffsRubicon35.jpg


JeffsRubicon24.jpg


JeffsRubicon25.jpg


JeffsRubicon33.jpg


JeffsRubicon32.jpg


JeffsRubicon30.jpg


JeffsRubicon28.jpg


JeffsRubicon31.jpg


JeffsRubicon29.jpg


JeffsRubicon26.jpg


JeffsRubicon27.jpg




Thanks for checking it out!  Now it can get all muddy and dirty while keeping the paint protected.
 
Back
Top