Ok I am new to this site. My name is will and i am 16 have a jeep wrangler sport 2003. I am obsessive about it cleaning it and maintance but want to go further. I am going to say what i do and i would like yall to tell me yay or nay..What i have been doing is washing all mud or dirt off the car. Then taking turtle was car soap and hand washing the car down with a soft terry cloth. Then i let dry, and then repeat before i put on a coat of Zymol wax. i then wax the entire exterior of the car then hand buff off. Then i will take a tire cleaner and spray the tires and wipe the bumpers off. I know this sounds very simple for yall that is why i am going to ask about sealants clay baring using armol using a buffer and any tricks on the carpet and seats i pretty much have the inside down but any tricks or tips would be appriciated. Also the color of my jeep is Kakhi
Jeep Detailing
- Thread starter willbjew
- Start date
Ferrarislave
exotiXboard
Sounds good I would recommend using the autopia FAQ's. Sealenets are pretty straight forward apply and buff off and apply a coat if desired in 24h. I dont know why you wash twice unless there is alot of caked on mud.
Last edited:
Oops. On the black fenders, use AIO or VM.
On the wheelwells, use your favorite APC. On the rear wheelwells, use some AA/NXT/BnB on the plastic.
Open the hood to ensure proper coverage of clay/polish/ect....
Product suggestions based on color: VM, followed by EX-P, followed by Natty's (one day later).
On the wheelwells, use your favorite APC. On the rear wheelwells, use some AA/NXT/BnB on the plastic.
Open the hood to ensure proper coverage of clay/polish/ect....
Product suggestions based on color: VM, followed by EX-P, followed by Natty's (one day later).