Is DACP more of a PC polish then Rotary?

M

MBurnickas

New member
I tried DACP with the rotary a couple times and ended up with a gummy mess and didn't accomplish anything but muking up my pads, then went to IP and had no issues. I wanted to know is DACP more of a PC polish, or is it just finiky? Bad batch? Tips?
 
We use almost a gallon per week. It is our 'goto' product, because of its durabilty.

Maybe wander over to Meguiarsonline.com and see what they have to say...



Good Luck.



Jim
 
Thanks for the replies, I will try using less but I'm still wondering if it is more of a PC polish than a Rotary polish. Mr. Buffit, (like the name) do you use it with a Rotary? and what do you mean about DACP's durabilty?
 
I was at a Meg's Detail Clinic recently , and , according to Mike Phillips , DACP is the limit of what you should use with a PC. Anything more aggressive should be applied via rotary.



So , in short , yes, DACP is more suitable for the PC.
 
i too find it gums up with a rotary,, but never had a problem with a PC.



i'm guessing the heat a rotary generates has a lot to do with its breakdown...



next time i'm going to try it, i'll slow it down, lighten up a bit, and use a little less.
 
With the PC DACP gums up if you use too much (or when the pad gets saturated, change it or wipe/squeeze it out part way through) or if it's too hot out (direct sunlight and/or dark, hot car). I'm guessing the rotary just exacerbates those problems.
 
You must log in or register to reply here.
Back
Top