In what order do I repeat my NXT / #16 application?

[imported_lmg_35c]

Over the course of a week I had applied NXT x2, then #16 x2 with very good results. (My Gallery - LMG_35c)

Since then, about two months ago, I've washed with NXT wash, and have used Meg's detailing spray for touch-ups.



Questions are;

1. Should I apply #16 again, or start all over with NXT wax?

2. Will NXT remove #16 or do I need something else?

3. What's been the efffect of the detail spray that I've used over #16?



I'm so confused...and really want to properly maintain the shine that I've achieved. ...and I'm too late for the NJ detailing class that's planned later this month



Thanks in advance for all your good info to date - my apologies if this has been addressed but I couldn't find answers to my specifc questions.

 

[Big Leegr]

1-16 is not a cleaner wax, so if your surface is still well prepped (no swirls etc.) then you can go ahead with another coat of 16.



2-NXT has some cleaners, so if you go with that, be prepared to follow with 16 after a proper amount of cure time.



3-The detail spray would have helped remove water spots, boosted the shine and helped the gloss (as long as it wasn't Final Inspection. If it was, you just cleaned up waterspots.) Shouldn't affect the 16 or NXT bonding.

 

[Mike_Phillips]

Hi LMG_35C,



BigLeegr seem to cover all the bases of your question, as far as the detailing clinic in New Jersey goes, I would suggest you add your name to the standby list. I spoke with Rod this morning and he said that as long as there are not too many on the standby list, he would open the class to a few more.







Rod Kraft's Meguiar's Detailing Clinic in New Jersey



Mike