How can I clean safety belts?
- Thread starter blankpro
- Start date
Anthony O.
New member
Burn them and then use large rubber bands in their place 
OK, for real now.....pull the belts all the way out and use something at the top to clamp them, like a clothes pin or tape. Now use a carpet and fabric pre-spot cleaner, like the one by "303" and let it dwell for about 10 to 15 minutes.
From thi spoint you can scrub them and use a towel to wipe them dry or use a steam vapor cleaner to really clean them to as new condition.
Either way you clean them the drying process is important. Make sure they are completly dry before allowing them to return to their holding area and do not allow them to dry in the sun.
Post some pics and I hope this helps.
Anthony
OK, for real now.....pull the belts all the way out and use something at the top to clamp them, like a clothes pin or tape. Now use a carpet and fabric pre-spot cleaner, like the one by "303" and let it dwell for about 10 to 15 minutes.
From thi spoint you can scrub them and use a towel to wipe them dry or use a steam vapor cleaner to really clean them to as new condition.
Either way you clean them the drying process is important. Make sure they are completly dry before allowing them to return to their holding area and do not allow them to dry in the sun.
Post some pics and I hope this helps.
Anthony
imported_mirrorfinishman
New member
Has anyone given any thought to the fact that the belt fibers may begin to weaken and 'break down' from the cleaning process?