Has anyone used Klasse HGSG without its twin?

[BIOLINK]

I'm curious if anyone has used Klasse HGSG as a stand alone lsp (without using its twin first) If so, which product did you use to prep the paint?

 

[BigJimZ28]

KSG is a little picky about what is bonds to so you will want to use a good chemical cleaner first



KAIO, Prime, ect..

 

[BIOLINK]

KSG is a little picky about what is bonds to so you will want to use a good chemical cleaner first



KAIO, Prime, ect..

Still learning products, what is Prime?

 

[BigJimZ28]

Jeff's Werkstatt Prime

 

[Garry Dean]

I use it regularly. I have had no problems getting 6 months + of protection after just wash, clay, KSG.

 

[BIOLINK]

KSG is a little picky about what is bonds to so you will want to use a good chemical cleaner first



KAIO, Prime, ect..

I planned on using PO106FF and/or FPII followed by Klasse HGSG. We'll see how it goes.

 

[M0nk3y]

You need a couple layers from it to get any worth-while depth or durability.....



Putting one layer is just useless......I have some Klasse HGS for sale. PM if you want it. There should be 50%-75% remaining. I can take pictures if you want

 

[BigJimZ28]

I planned on using PO106FF and/or FPII followed by Klasse HGSG. We'll see how it goes.

Good luck!

 

[backwoods_lex]

I use KSG quite a bit but have never used KAIO. It does have bonding issues, so after polishing I spray the panels with a 50/50 water alcohol mix. Works great for me.

 

[blk45]

I planned on using PO106FF and/or FPII followed by Klasse HGSG. We'll see how it goes.

Make sure that you do an IPA or Prepsol wipe down after polishing. Otherwise, you will compromise the bonding and decrease the durability.

 

[BIOLINK]

Thanks for all your input! Gives me a place to start.



:buffing: