Handz Detailed: 2003 Cobra Headlight Restoration #2

[Handz]

So, I acquired another set of OEM 2003 Mustang Cobra Headlights. These ones came from a 10th Anniversary Cobra. They had some really weird sun damage from being cooked in the So Cal Sun... So i gave them a REALLY good Restoration. The ones took ALOT of time, I have a good 6 hours into them to remove all the defects. Also tried a few new products and liked the results.



3M Wet/Dry Sand Paper

-600 Grit

-800 Grit

-1000 Grit

-1500 Grit

-2000 Grit



-3M Rubbing Compound w/Hexlogic Orange

-3M Machine Polish w/Hexlogic White

-CG Rocket Polish w/Hexlogic Blue



-Meguires #21

-CG Deep Reflections XP



Before

Both Sanded

Halfway Done!!!

AFTER

 

[RPG]

came out awesome...what machine are you using? I'm assuming 4" pads?

 

[sjs0433]

I'm curious as to why it took so long? I've done a couple headlights and even with sanding it didn't even take an hour to do it.

 

[MirrorDetailing]

Looks like a great job. i am curious as to how you got close enough to the edges since most 96-04 mustang headlights have that weird rubber trim around them. Since with 600 grit doesnt seem like the tape would hold up to weel around the rubber.