Gleaming Kleen
New member
This saw a 3 day trip out to Bedfordshire and seen 23 hours of work.
Didnt take any pics of the wash stages as most know the process.
WHEELS
-P21S Red wheel gel
-arches and tyres cleaned with Surfex HD
-SV cleaner fluid wheels and SV Autobahn wehel wax applied
-Tyres dressed with SV Pneu
WASH
-pre foam with AG Powermax 3 and worked into all badges and panel gaps and high pressure rinsed
-2nd foam with PM 3
-Megs Shampoo Plus and lambswool wash mitt
-Clayed using sonus Green
OTHER
-windows cleaned with SV Glass cleaner
-all chrome/metal polished with SV Metal Polish and Brillant polishes
-
Bentleys are hand painted and paint readings showed healthly amount of paint ranging from 170 - 240 microns. All correction work was done using 3M Fast Cut Plus and a Megs Cutting pad with most area's needing 2-3 hits. Some area's on boot and bonnet were also wet sanded using 2000 and 4000 abralon pads. Bumpers were corrected using Menz 106 FF using a porter cable
All the "after" pics below are after compounding and yet to be refined.
Before
After
Before
After
Before
After
Before
After
Before
After
Before
After
Before
After
Before
After
Before
After
Before
After
Before
After
After all correction work was done the paint was refined using Menz 85 rd and a megs finishing pad. Vehicle was then given a IPA wipedown and work checked over once again
Paint work was then treated to 2 coats of Zaino Z2 and topped with Zaino CS
As always thanks for looking
Didnt take any pics of the wash stages as most know the process.
WHEELS
-P21S Red wheel gel
-arches and tyres cleaned with Surfex HD
-SV cleaner fluid wheels and SV Autobahn wehel wax applied
-Tyres dressed with SV Pneu
WASH
-pre foam with AG Powermax 3 and worked into all badges and panel gaps and high pressure rinsed
-2nd foam with PM 3
-Megs Shampoo Plus and lambswool wash mitt
-Clayed using sonus Green
OTHER
-windows cleaned with SV Glass cleaner
-all chrome/metal polished with SV Metal Polish and Brillant polishes
-
Bentleys are hand painted and paint readings showed healthly amount of paint ranging from 170 - 240 microns. All correction work was done using 3M Fast Cut Plus and a Megs Cutting pad with most area's needing 2-3 hits. Some area's on boot and bonnet were also wet sanded using 2000 and 4000 abralon pads. Bumpers were corrected using Menz 106 FF using a porter cable
All the "after" pics below are after compounding and yet to be refined.
Before
After
Before
After
Before
After
Before
After
Before
After
Before
After
Before
After
Before
After
Before
After
Before
After
Before
After
After all correction work was done the paint was refined using Menz 85 rd and a megs finishing pad. Vehicle was then given a IPA wipedown and work checked over once again
Paint work was then treated to 2 coats of Zaino Z2 and topped with Zaino CS
As always thanks for looking
