Porter Cable got a rebate for 25 back for buying $150 tools. So a friend and I are going to get two 7336. Which is not a bad deal at all. I need some tips on using the pad and the polish on them. I not really sure how to go about it. I waxed with a machine before but not with polish. With wax, I usually dab on the pad and then dab it around the area and then wax. Do I do the same with the polish? Put some on the pad and then dab it around the area before I polish and then turn on the machine? Or do I just polish the damn area? Also wat speeds do u guys like for polishing and waxing.
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
Style variation
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Getting a PC from lowes
- Thread starter fusionnv
- Start date
Great write-up for a beginner:
http://bimmer.roadfly.org/bmw/forums/detailing/forum.php?postid=1430487&page=1
Scroll down to "Using the PC."
http://bimmer.roadfly.org/bmw/forums/detailing/forum.php?postid=1430487&page=1
Scroll down to "Using the PC."
ZJ JIM 96 said:Great write-up for a beginner:
http://bimmer.roadfly.org/bmw/forums/detailing/forum.php?postid=1430487&page=1
Scroll down to "Using the PC."
Damn that is nice, it basically gives u instruction how to do it. Thanks most of the bottles and stuff i got is kinda vague.
mike79 said:Whats the difference between the 7336 and the 7424???
I did some looking it looks like:
7335 - sander with 5" weight
7336 - sander with 6" weight - $108 at lowes
7424 - polisher with 5" weight and the hook and loop plate - $119 at costal tools and if u want to reduce vibration on larger pads the 6 inch weight is like 20 bucks i believe not sure.
Griots sells a 7336 with a dust collector/case. Which normally is about $150 else where, but he gives u a 3m plate which is like $15 elsewhere. He charges $199.
They all are pretty much the same machine with different accesories.
mike79 said:Whats the difference between the 7336 and the 7424???
http://www.autopia.org/forums/showthread.php?s=&threadid=14421&highlight=accessorizing
huangdong28
New member
fusionnv said:Porter Cable got a rebate for 25 back for buying $150 tools. So a friend and I are going to get two 7336. Which is not a bad deal at all.
But wait, there's more . . . .
So, as a start, you're happy to pay [$220 - $25] split 2-ways =
$ 97.50
If you find another friend, it goes down to [$330 - $50 rebate] split 3 ways =
$ 93.33
But, if you go to Lowes.com to register, and you check the box "I may be moving in 6 months", you get another 10% off the full $110, bringing the cost down to:
$ 82.33
Don't you just love Math word problems?