What is the proper technique for using FPII? I bought a bottle and use it today with poor results. It didn't do much for the minor swirls and removing the residue was far more difficult than removing a thick cote of KSG.
I use a PC with a polishing pad, with the polish applied to the pad in two narrow strip of about 4" long in an "X" pattern. I then spread the FPII over a 4 square foot area on speed setting 3. From there, the speed was increased to 5 and buffed until it appeared that it was nearly dry. Temperature was in the low 90s with about 50% humidity.
What did I do wrong?
I use a PC with a polishing pad, with the polish applied to the pad in two narrow strip of about 4" long in an "X" pattern. I then spread the FPII over a 4 square foot area on speed setting 3. From there, the speed was increased to 5 and buffed until it appeared that it was nearly dry. Temperature was in the low 90s with about 50% humidity.
What did I do wrong?
