first time would like some advice.

E

eduardmc

New member
this is my first time, i have not purchase anything but i already have it on the cart to check out. Before i do any of this would like some advice.



my car is an acura TL 2005 BLACK. the paint is in good condition with some swirls in the light, there's some parts that look much worst than others.



now this is what i have in the cart to purchase



meguiars g110v2

Buff & Shine 3" Backing Plate & Adapter Kit

32 oz. Meguiar's M205 Ultra Finishing Polish

Meguiar's M21 Synthetic Sealant 2.0 16 oz.

Lake Country 4" CCS Pad 6-Pack



* Pad Choice 1 : White

* Pad Choice 2 : White

* Pad Choice 3 : White

* Pad Choice 4 : Black

* Pad Choice 5 : Black

* Pad Choice 6 : Blue



Hi Tech Mild 100 Gram Clay Bar





Now before giving your advice this is the reason i selected this items.

I choose meguiars since from what i read is easier, more confortable and quiter than 7424xp.



I choose 4" pad because i heard that it does a better job than having bigger pad you get more cuts.



I choose meguiar m205 only and not m105 because this will be my first detailing correction job and is going ot be on my car, i heard that people usually get good correction using only M205 and white pad. after i learn how to handle things ( i have never hold a polisher D/A in my life) i plan on doing 2 passes, one with the white pad and pressure and the second with the black pad.



I choose the meguiar sealant because i needed a sealant and heard good thing about this one, i wanted the blackfire wet but i have to order from another place.



would like to know your opinion on this since this is my first time and would like to do some LIGHT CORRECTION only until i'm more aware of what i'm doing.

let me know if you would change anything.
 
I think that looks like an excellent selection of choices.



If you wanted to, you could replace the blue pad with an orange LC light cutting pad JUST incase you ran into a situation that required a bit more umph.



M21 is a great sealant.



One thing to consider with the PCXP/G110V2 is they are really good now on power compared to the machines of old, you might consider getting a few 5.5inch pads. They(the pads) work really well with M105 and 205 which you selected.



Good choices. I would buy the same things.:xyxthumbs
 
getcha said:
I think that looks like an excellent selection of choices.



If you wanted to, you could replace the blue pad with an orange LC light cutting pad JUST incase you ran into a situation that required a bit more umph.



M21 is a great sealant.



One thing to consider with the PCXP/G110V2 is they are really good now on power compared to the machines of old, you might consider getting a few 5.5inch pads. They(the pads) work really well with M105 and 205 which you selected.



Good choices. I would buy the same things.:xyxthumbs
Click to expand...





thank you that's what i needed to here i'm going to switch to 5.5inch pad then and would get some orange pad aswell.



:thx again
 
You bet:xyxthumbs. If you can budget it, stick keep the 4in pads in the colors or your choice for the small or tight spots.
 
You must log in or register to reply here.
Back
Top