First time using EX-P.....

[Nicky Pass]

I used a micro-fiber applicator, and it was pretty smooth going. It seemed like it went on okay...not as easy as Nattys...but okay. My question is....is EX-P something I should layer...or is it a waste of time. From all of the stuf I've done so far, my white car has alot of "pop" and wetness. When I'm done with EX-P, I'm gonna top that with Nattys.

 

[imported_Picus]

I put a couple layers on, but I don't think it makes much of a difference at all, if any. I normally wait a day between the two layers.

 

[DrSauekraut]

Yes, you can layer EX-P. I find 2 applications to provide sufficient protection, shine, and gloss. If I’m not mistaken, there’s no down time either (curing) . . . you can top immediately with Natty’s. Good luck :xyxthumbs

 

[JaCkaL829]

If your topping it with Natty's, I wouldn't do more than 2 coats of EX-P just to ensure you didn't miss any spots.

 

[s2skimon]

its so easy to apply and remove that i usually put down 2 or 3 layers at time, then top with Natty's blue.. and then look out ! wetnesssssssssssss